o Alekzander Spiridonov on 06/21/2011 08:39 AM:
Hi, Stefan
2011/6/20 Stefan Sayer <[email protected]
<mailto:[email protected]>>
Hi,
o Andreas Granig on 06/20/2011 05:01 PM:
Hi guys,
I'm interconnecting Sems sbc module with an external server, which
requires authentication, which works for INVITE (SEMS is
getting a 401
(not sure why not 407, but whatever) and resends the INVITE
with proper
Authorization header).
However, also the BYE requires authentication, again triggered
via 401,
but this time Sems is not resending the BYE with Auth. headers.
atm, the BYE is handled in a specific way as it terminates the
call - when it is received, the BYE is sent in the other leg, both
legs are ended and immediately dropped completely on
dialog/application layer.
I knew it =) May be it could be easy to implement adding
authentication parameters from the initial INVITE to the BYE (or even
to all) request? If UAS doesn't suppose UAC to authenticate the
request it'll safely ignore these headers. But on the other hand it
will fix Andreas issue.
indeed, that's worth a try!
Stefan
_______________________________________________
Sems mailing list
[email protected]
http://lists.iptel.org/mailman/listinfo/sems
