Glad to hear you got your parts. I had a hard time removing that long bolt too
but was able to do it by putting the spindle in a vise and using an impact
wrench. You can rebuild the calipers although it is more involved than
rebuilding the front calipers.
[EMAIL PROTECTED] wrote:
> I went to a yard today and got the rear discs of the NX2000. They were
> coated with alot of dirt. He had a real bitch of a time getting the control
> arms off. I got the calipers, rotors, the spindle, bearings as one unit,
> they just unbolted the things. He could not get the long bolt out of the
> knuckle to free the control arms. He told me to try to heat the bolt up and
> get it red hot, the bushing will melt and the bolt should turn. I can't use
> them because they were trashed from a wreck. But the spindle and stuff is
> great. I am planning to rebuild the calipers and get new rotors and such.
> They gave me the E-brake cables also, they are in good shape, like new. The
> shields are rusty and I am romoving them.
> Can you rebuild those rear calipers and if you can, what comes with the
> kit, New piston and new rubber stuff?
> Thanks Chris 92 classic
>
> +----------------------------------------------------------------------+
> List archives ==> http://www.escribe.com/automotive/sml
> Have a question? Try the archives first.
+----------------------------------------------------------------------+
Have questions about your car? Try here: http://www.sentra.net
