I got the hubs off and they look good. My impact gun could not budge it. I
cranked up the pressure to 130 and turned up the gun and still no way. So I
am soaking the ends with penetrate and allowing the stuff to seep into the
crevices of the pin. I am going to try to hit the end with an sledge to tap
it out. I got the bolt off with no problem and that control arm came out
with no problem. I tried heat on the pin also with the gun and not a turn of
it. I pulled the boots off the calipers and they are rusted. So I am buying
new calipers from NAPA. 45 with core. The cables are good and I will need
the brake lines.
Are you going to try the stock master cyl with the front AD22Vf's
attached too?
Thanks for the advice and help
Chris
+----------------------------------------------------------------------+
To unsubscribe, put "unsubscribe" (by itself) in the subject and send to
[EMAIL PROTECTED] or use the form at http://www.sentra.net/sml
