nope its a slider, i put it in and so far so good :) In a message dated 1/1/2014 12:56:29 P.M. Pacific Standard Time, turbo...@juno.com writes:
Stamped sounds like a roller rocker. Not compatible if so. Rex Sent from Samsung tablet -------- Original message -------- >From rapid...@aol.com Date: 01/01/2014 12:09 PM (GMT-08:00) To shelbydodge@imagilist.com Subject Re: SD> no compression in cyl 3? Well the rocker bit the dust ( it must have been flying around the valve cover) so I pulled one from my other engine but it is a stamped one and the one in the car is a cast kind, does it matter if its cast or stamped? Roy In a message dated 1/1/2014 12:01:58 P.M. Pacific Standard Time, j...@planetb.net writes: The way I fixed it before was to unbolt all the cam caps and slide it back in place and retorq cam caps. The problem is if you dropped a rocker, it will happen again. Cam or slider is worn out. -----Original Message----- From: shelbydodge-bounces+jcc=planetb....@imagilist.com [mailto:shelbydodge-bounces+jcc=planetb....@imagilist.com] On Behalf Of rapid...@aol.com Sent: Wednesday, January 01, 2014 2:44 PM To: shelbydodge@imagilist.com Subject: Re: SD> no compression in cyl 3? i pulled the vcover and yes a slider fell off. im now trying to find a valve compressor. Roy In a message dated 12/29/2013 9:16:08 P.M. Pacific Standard Time, amop...@yahoo.com writes: I don't know how you drive your cars, but I've seen rockers (followers) get thrown off the cam. The slider cam/followers that the older TD's came with are prone to wear and get loose. If they get revved too fast, they can jump off. I've seen this twice in two different Omnis my sister had, my Dad's minivan, a car I bought from a friend and once on my Shelby Charger. The roller rockers (followers) are less prone to get thrown, but I have seen it happen. Just an idea. Good luck From: "rapid...@aol.com" <rapid...@aol.com> To: shelbydodge@imagilist.com Sent: Sunday, December 29, 2013 11:01 PM Subject: SD> no compression in cyl 3? Hi All I have lost compression in #3 cyl in the Lancer, anyone know of any clues of what I should look for? Thanks Roy 1987 Shelby Lancer #781 1986 GLHS #200 ___________REMOVE-FOOTER-WHEN-REPLYING_________ ShelbyDodge mailing list _ShelbyDodge@imagilist.com_ (mailto:ShelbyDodge@imagilist.com) http://www.imagilist.com/mailman/listinfo/shelbydodge ___________REMOVE-FOOTER-WHEN-REPLYING_________ ShelbyDodge mailing list ShelbyDodge@imagilist.com http://www.imagilist.com/mailman/listinfo/shelbydodge !DSPAM:52c46ffc54512113396810! ----- No virus found in this message. Checked by AVG - www.avg.com Version: 2013.0.3462 / Virus Database: 3658/6966 - Release Date: 01/01/14 ___________REMOVE-FOOTER-WHEN-REPLYING_________ ShelbyDodge mailing list ShelbyDodge@imagilist.com http://www.imagilist.com/mailman/listinfo/shelbydodge ___________REMOVE-FOOTER-WHEN-REPLYING_________ ShelbyDodge mailing list ShelbyDodge@imagilist.com http://www.imagilist.com/mailman/listinfo/shelbydodge