Mark, What are your objectives and preferences for your irons? What kind of look do you like? How far do you want to hit a 7-iron and a PW? What are your directional tendencies? Cost parameters?
If you like the look and feel of blades, the semi-cavity back Chicago 944C is hard to beat. Hits solid and long with the right graphite shafts...like Apache PM-30s. If you like cavity backs with low offset, Hireko's Acer XDS2 Professional is a quality-made, solid hitting head that looks much more expensive than it is. PW is slightly delofted at 46�. If you like cavity backs and are a fader who is helped by offset and needs distance in the short irons, Hireko's Catapult STS is another quality, low cost head with a low cg and is considerably delofted for the 7 through the PW (44�). I'm playing the Catapult STS with steel shafts from 8-PW and the Chicago 944s from 4 through 7-iron with Apache graphites. The combo works well for me, since I have a slightly outside-in swing and tend to launch my short irons higher than normal. Others that seem to play well for my customers: Dynacraft PC-3 has three different lies available. Golfworks CER 551 plays OK. Check out golf club review for some others. http://www.golfclubreview.com/componen2.htm Bernie Writeto: [EMAIL PROTECTED] ----- Original Message ----- From: "Mark A. Patton" <[EMAIL PROTECTED]> To: <[EMAIL PROTECTED]> Sent: Sunday, August 25, 2002 3:44 PM Subject: ShopTalk: was Test now iron heads > oops > quiet I meant > > Looking for opinions on your fav iron head and why. > My house was robbed the other day, and one of the many things taken was > my > clubs. Being that it is slow, lets open up a thread on fav iron heads > and > the whys behind it. > > Mark > > "Mark A. Patton" wrote: > > > Test > > Been real quite here > > > > Mark > > >
