On Tue, October 14, 2003 at 2:31 pm, Jim & Ivette sent the following > This is clearly an area i need to do more research in, I have felt more > than > one spine on graphite and some areas that had more resistance than others, > but with steel it almost always is a single very pronounced spine, in > these > instances the nbp would be 180 opposite, correct?
On just about all the steel shafts that I've checked, the NBP has never been exactly 180* opposite of the spine. A few shafts have had one large spine with a smaller spine maybe 45* away and the NBP somewhere on the otherside. But very rarely is the NBP exactly 180* away from the spine. -Dave
