Re: ShopTalk: Titanium shafts

[Pat-On Target Golf]

Bernie and anyone else,
 You just reminded me of a question I wanted to post a while back, I have 
used plugs like you just recommended to Tedd, my question is, should you 
insert a shaft in the BOM and other deep bore heads to play the way the head 
was designed?  Is there specific reasons that those heads have such a deep 
bore? As always, TIA
Pat-On Target Golf
[EMAIL PROTECTED]
----- Original Message ----- 
From: "Bernie Baymiller" <[EMAIL PROTECTED]>
To: <ShopTalk@mail.msen.com>
Sent: Wednesday, January 05, 2005 1:53 PM
Subject: Re: ShopTalk: Titanium shafts


Tedd,
Is there some reason you aren't considering a 1" plug in the BOM? I've 
done
a few BOMs this way and the shafts seem to play the way you expect them to
play.

Bernie
Write to: [EMAIL PROTECTED]
----- Original Message ----- 
From: "Childers, Tedd A" <[EMAIL PROTECTED]>
To: <ShopTalk@mail.msen.com>
Cc: <[EMAIL PROTECTED]>
Sent: Wednesday, January 05, 2005 12:26 PM
Subject: ShopTalk: Titanium shafts


Anyone have any experience with TiSports titanium wood shafts?  I am
thinking about trying one of these in my driver (Bang-O-Matic 401cc), as
the
extra weight will help me to achieve my preferred swingweight (D2-D4) at
44"
length, without adding a lot of weight to the head.  The main concern I
have
is that the BOM has a VERY deep hosel insertion depth (2.5"+), so I don't
know if I should go with an R or an A flex raw shaft.  The website
recommends R flex for 85-100MPH swing, and my SS is around 90-95.  I'm
afraid that the deep insertion will stiffen an R flex too much for my
swing.
Any help would be appreciated.
Tedd