On Mon, 19 Jul 1999 21:02:02 -0600 (MDT), [email protected] (Tom
Trauberman) wrote:
>I purchased a 13.5/30v 1000mA power adapter from Radio Shack, part
>#273-1668. I hooked it up with alligator clips to my gold wires. My
>attempts to arc in distilled water resulted in the wire disintegrating
>in the areas where the arching occurred. I switched to the 13.5 setting
>and was able to complete the process successfully. I then made a batch
>of CS using the 30v setting and made a batch of clear CS with good
>tyndal, had little treeing on the wires. Conclusion; This power adapter
>can be used to make CS and CG by changing wires and technique as
>mentioned above. Caution: Be careful as mentioned in earlier posts this
>amount of current can give a dangerous shock.
>
>Tom
Tom,
Is that correct, at 30v the gold dissintergrated and at 13v it arced
and created colloids? How odd, considering you did it with 90v
earlier.
Was there Tyndall?
Also, what grade of gold wire, and where do you get it?
Inquiring minds want to know!!!!
Chuck
Yes, sir, we've graphed the data. It's a smiley face, sir.
--
The silver-list is a moderated forum for discussion of colloidal silver.
To join or quit silver-list or silver-digest send an e-mail message to:
[email protected] -or- [email protected]
with the word subscribe or unsubscribe in the SUBJECT line.
To post, address your message to: [email protected]
List maintainer: Mike Devour <[email protected]>
