Hi Joseph,
I set up a barebones type of generator - 4 9v's - 2 rods that I got off
ebay that said .9999, 2 9v connectors and 2 alligator clips. I am using
whatever distilled water I can get - unfortunately it's not easy to find
where I live and the one place I did find - perhaps didn't have the
absolute best. But it is what it is - and that is that I used. About 15
minutes after hooking everything up I noticed both rods getting black.
One then started getting fuzzy black. I kept the power going for about 3
hours, during which I adjusted the connectors a bit and then started
noticing the particles rising. The result was a light yellow.
I am dealing with 3 sick cats in Israel. It's the best I can do. I need
help with this, no doubt. I did dose them with it anyway because simply
I have nothing else I can give them. That's the story. I'm hoping I can
get some kind of distiller down the line but right now I'm tapped out
financially as well. So it's just blessing after blessing.
Stay cool.
Joy
Hi Joy,
First off, forgive this list for ignoring your question. I expected
someone more knowledgeable than myself to respond as I consider myself
a newbie too. Hopefully someone answered your questions off list. This
is a wonderful list but newbies do get ignored sometimes. A
little baffling when a newbie doesn't get answered about basic CS.
To answer your questions, No I probably would not drink it. & No, I
have never seen bubbles in mine. If you have external uses, foot bath,
cuts, rashes fungus, etc., use it for that. Or maybe let it settle &
"decant" whatever sinks.
Here's some questions for you. What do you mean by "generator?" Hows
your cs maker built? Is it DC? Direct current? Do you know the
voltage? If its a plug in transformer, like from radio shack, it'll
say a number followed by the letter "V". Are you using batteries? If
you connect them end to end, like in a flashlight, you add the
voltages together.
Mine is a dc wall transformer, it runs 12v for 30-60 minutes, then I
turn it over to reverse the polarity for another bit of time.
Was this helpful?
*From: *"j.sherri" <beitharm...@gmail.com <mailto:beitharm...@gmail.com>>
*Date: *August 21, 2009 2:05:25 AM PDT
*To: *silver-l...@eskimo.com <mailto:silver-list@eskimo.com>
*Subject: **CS>Making first batch - Couple of questions?*
Hi,
I put up a bare bones generator and both rods are black one with
barnacles. Not seeing any activity such as bubbles. It's been an
hour. How long does it take for the tiny bubbles to start? Is that a
perquisite even?
Thanks so much,
Joy
--
The Silver List is a moderated forum for discussing Colloidal Silver.
Instructions for unsubscribing are posted at: http://silverlist.org
To post, address your message to: silver-list@eskimo.com
Address Off-Topic messages to: silver-off-topic-l...@eskimo.com
The Silver List and Off Topic List archives are currently down...
List maintainer: Mike Devour <mdev...@eskimo.com>