Using that method, one electrode turning fuzzy black is normal. [Silver
Oxide]
The other turning black, isn't. [Who knows what, being made out of silver
ions and water contamination....probably. ]
Normally, That one would be sort of whitish to tan with Silver Hydroxide
and metallic silver "dust"
Not bad in a pinch, animals don't care...you have NO idea how strong it
is...it'll "work".
For you?
..won't kill ya. Could save your butt in an emergency.
Probably wouldn't want to make a habit out of using a lot of it for a
long time.
....could be better without much effort.
More info:
http://silver-lightning.com/theory.html
http://www.colloidalsilver.com.au/FREE-DIY.html
[Quick cheap and dirty current control.....If you see a "Golden
mist" remove a battery]
Ode
At 10:15 PM 8/22/2009 +0300, you wrote:
Hi Joseph,
I set up a barebones type of generator - 4 9v's - 2 rods that I got off
ebay that said .9999, 2 9v connectors and 2 alligator clips. I am using
whatever distilled water I can get - unfortunately it's not easy to find
where I live and the one place I did find - perhaps didn't have the
absolute best. But it is what it is - and that is that I used. About 15
minutes after hooking everything up I noticed both rods getting black. One
then started getting fuzzy black. I kept the power going for about 3
hours, during which I adjusted the connectors a bit and then started
noticing the particles rising. The result was a light yellow.
I am dealing with 3 sick cats in Israel. It's the best I can do. I need
help with this, no doubt. I did dose them with it anyway because simply I
have nothing else I can give them. That's the story. I'm hoping I can get
some kind of distiller down the line but right now I'm tapped out
financially as well. So it's just blessing after blessing.
Stay cool.
Joy
Hi Joy,
First off, forgive this list for ignoring your question. I expected
someone more knowledgeable than myself to respond as I consider myself a
newbie too. Hopefully someone answered your questions off list. This is a
wonderful list but newbies do get ignored sometimes. A little baffling
when a newbie doesn't get answered about basic CS.
To answer your questions, No I probably would not drink it. & No, I have
never seen bubbles in mine. If you have external uses, foot bath, cuts,
rashes fungus, etc., use it for that. Or maybe let it settle & "decant"
whatever sinks.
Here's some questions for you. What do you mean by "generator?" Hows
your cs maker built? Is it DC? Direct current? Do you know the voltage?
If its a plug in transformer, like from radio shack, it'll say a number
followed by the letter "V". Are you using batteries? If you connect them
end to end, like in a flashlight, you add the voltages together.
Mine is a dc wall transformer, it runs 12v for 30-60 minutes, then I turn
it over to reverse the polarity for another bit of time.
Was this helpful?
*From: *"j.sherri" <beitharm...@gmail.com <mailto:beitharm...@gmail.com>>
*Date: *August 21, 2009 2:05:25 AM PDT
*To: *silver-l...@eskimo.com <mailto:silver-list@eskimo.com>
*Subject: **CS>Making first batch - Couple of questions?*
Hi,
I put up a bare bones generator and both rods are black one with
barnacles. Not seeing any activity such as bubbles. It's been an hour.
How long does it take for the tiny bubbles to start? Is that a perquisite even?
Thanks so much,
Joy
--
The Silver List is a moderated forum for discussing Colloidal Silver.
Instructions for unsubscribing are posted at: http://silverlist.org
To post, address your message to: silver-list@eskimo.com
Address Off-Topic messages to: silver-off-topic-l...@eskimo.com
The Silver List and Off Topic List archives are currently down...
List maintainer: Mike Devour <mdev...@eskimo.com>
