Yes, it is 3% H202. My apologies to Ode for not realizing he was the discoverer of the technique. And thanks to Marshall for his part as well. - Steve N
________________________________ From: Alan Jones [mailto:[email protected]] Sent: Monday, August 24, 2009 9:02 AM To: [email protected] Subject: Re: CS>Silver/Autism/Safety We're talking about 3% H2O2, right? Alan On Mon, Aug 24, 2009 at 10:58 AM, Marshall Dudley <[email protected]> wrote: Norton, Steve wrote: Actually this is better answered by Marshall since he discovered the technique. I did not discover it. I thought it was Ode. I did however analyze what effect H2O2 should have on CS. I use a tsp per gallon. But you must wait at least a couple of days after making the EIS before adding the hydrogen peroxide. I use 1/2 teaspoon per gallon 1/2 cup per 55 gallon drum, which is in the same ball park. IMO adding HP is one greatest EIS generation discoveries. Second only to using distilled water. BTW when using HP you can make a higher ppm EIS because the HP will reduce the particle size of agglomerated silver and give a higher percentage of particles. Please realize that Steve is saying you can make a higher ppm CS using distilled water, which would have larger particles than desired, then break the particles down later by adding H2O2. Do not brew with H2O2 in there or you will get something that looks more like the inside of a snow globe. Marshall - Steve N PS - I just reread my post below and the 60% in the following should have read 40%; "percentage of silver particles to as much as 60 % by adding a small amount of hydrogen" ------------------------------------------------------------------------ *From*: john freese <[email protected]> *To*: [email protected] <[email protected]> *Sent*: Sun Aug 23 16:49:19 2009 *Subject*: Re: CS>Silver/Autism/Safety Hello, Steve How much hydrogen peroxide do you add to a quart of cs when you brew? Thank you. John. --- On *Sun, 8/23/09, Norton, Steve /<[email protected]>/* wrote: From: Norton, Steve <[email protected]> Subject: Re: CS>Silver/Autism/Safety To: [email protected] Date: Sunday, August 23, 2009, 12:04 PM Argentyn 23 is a fine ionic silver but I would not consider it the best value. First, the price is $36 for 8 oz. IMO that is high. You can make your own for about 1/100 of that. Second, the high ionic content, 95%, is too high. Some ionic content is very desireable but, again IMO, you should try to keep it to less than 60% if possible. If you make your own EIS you can increase the percentage of silver particles to as much as 60 % by adding a small amount of hydrogen peroxide to the EIS you make. I should let you know that ionic silver vs silver particles is a controversial subject. If you choose to buy colloidal or ionic silver rather than make your own several other good alternative sources for colloidal silver (high silver particle content) are: * Utopia Silver - $24 for 8 oz @ 20 ppm * Mesosilver - $25 for 8 oz @ 20 ppm - Steve N -- Alan Jones
