Hello Renee, I am actually making a solution of acidified sodium chlorite. When you activate MMS you also are making a solution of acidified sodium chlorite.
I don't consider 300 PPM "very dilute." 1 PPM is "very dilute." In water purification we use a "strong" concentration of 4 PPM. The MMS protocol is "supercalifragilisticexpilidocious" strong... :) Yes. If you mix the solution according to the directions I provided earlier, and store it out of UV light, it will still be viable after 4 weeks. Keep in mind that these products have been used in industry since the mid 1980's. Jim Humble is a newcomber to this whole technology. Mix some up and try it. You don't have to take my word for it, you can demonstrate it to yourself. A 2% sodium chlorite solution has been used in hospitals for hard surface sanitation. In hospital use, the label calls for replacing the solution after 2 weeks. I seem to remember it being a 100 PPM solution, but I would have to check on that. Other sanatizing solutions involve chlorine dioxide in water solutions. They have a commericial viable shelf life of 1 week. I believe the definition of a sanitizer is something that completely eliminates all of the pathogens in 30 seconds of contact. Chlorine dioxide is a very powerful oxidizer. Tom ----- Original Message ----- From: Renee To: [email protected] Sent: Sunday, February 14, 2010 4:02 PM Subject: Re: CS>ear infection Tom, I guess I'm still not getting this. You are in essence making a very dilute form of AMMS (activated mms), right? At 300ppm of chlorine dioxide? Yet you are saying that this mix, that the chlorine dioxide will still be viable after x number of days? Instead of the few hours that Jim Humble states the chlorine dioxide is viable in a regular AMMS solution? Thanks, Renee
