Hi Andre,
Here are some points :
1 ) Your brewing vessel should be very clean, and your silver should also be
very clean, meaning no oils from fingers e.t.c.
2) Use a very very good distilled water, preferably double distilled, I
distill my own and single distill never ever works well. I have had this
advice from others too.
3) Use a good meter to check the quality of your water and also the end
result. the water distilled water shouldn't have a reading of more than 1 us
or ppm.
4 ) Always clean the electrodes between brews.
5 ) If all that fails, call someone at Silvergen, Trem has earned a good
reputation for a reason!..
Give that a go and let us know.
Good luck!.
Peace to all,
Asif.
--------------------------------------------------
From: "André Juthe" <[email protected]>
Sent: Saturday, February 25, 2012 12:54 PM
To: <[email protected]>
Subject: Re: CS>Interview on One Radio Network
Hi dear friends of CS,
I have just tried my SG6 from www.silvergen.com. I chose that one
although it was expensive after reading a lot of about different
generators and it always got positive reviews and positive comments.
However, my first try was a bit disappointing. It took very long time
do to it, and it it swims around silverflakes on the surface and
bigger flakes lies at the bottom and I will have to filter it before
use. Since I have never done this before I do not really know what to
expect. Is this the way it should be?
Kind regards
André
--
The Silver List is a moderated forum for discussing Colloidal Silver.
Rules and Instructions: http://www.silverlist.org
Unsubscribe:
<mailto:[email protected]?subject=subscribe>
Archives:
http://www.mail-archive.com/[email protected]/maillist.html
Off-Topic discussions: <mailto:[email protected]>
List Owner: Mike Devour <mailto:[email protected]>
