I have been advised by many on this group to keep the current down to
1mA per square centimeter, in order to have nano particle size.
Joe
On 31/08/2013 10:03 PM, yousouf eydatoula wrote:
With 30 V dc use a 30K resistor. V=IR where V=voltage I=current. To be
accurate you have to consider also the resistance of the water between
the electrodes which varies with the conductivity and the distance
between the electrodes. May I ask why you need to be so accurate?
------------------------------------------------------------------------
*From:* Joe Huard <[email protected]>
*To:*
*Sent:* Saturday, August 31, 2013 7:22 PM
*Subject:* CS>help with diode
Hi,
I am lost trying to find a current limiting diode. I went to my local
electronics parts store, and he never even heard of them.
I found some on Mouser
http://ca.mouser.com/Semiconductors/Discrete-Semiconductors/Diodes-Rectifiers/Current-Regulator-Diodes/_/N-ax1ml,
but I don't get the "Maximum Limiting Voltage" part. What do I need
here? I was going to use 30 V and 1 mA.
Joe H.
--
The Silver List is a moderated forum for discussing Colloidal Silver.
Rules and Instructions: http://www.silverlist.org
<http://www.silverlist.org/>
Unsubscribe:
<mailto:[email protected]
<mailto:[email protected]>?subject=unsubscribe>
Archives:
http://www.mail-archive.com/[email protected]/maillist.html
Off-Topic discussions: <mailto:[email protected]
<mailto:[email protected]>>
List Owner: Mike Devour <mailto:[email protected]
<mailto:[email protected]>>
