Hi There Neville - am I to understand for this post that EIS or CS is alkaline and if so then this is the secret I have been looking for for a while and will explain many observances of mine !!!! Thanks Sandee🐬 Attitude is everything !!! Sandra George Colloidal Silver Products Eye Drops & Topical Gel [email protected]
On 3 Oct 2014, at 06:45, Neville <[email protected]> wrote: I had two samples tested for Ph, one was shortly after brewing, which returned high alkaline as it apparently went off his scale, the second sample had been in storage for a while and was around base 7 point something. This ties in with several samples which had been in storage for a while I had lab analysed years ago... Clear solution - 7.4Ph, conductivity 23uS/cm Yellow - 7.5,.......................19 Amber - 7.4.......................20 and another I only noted the date for - 7.8Ph, conductivity 24. This one was noted on the report as being a low volume sample for testing purposes. First three water temperature 21C and the last was 22C. I have always been of the opinion there *could?* be a difference in efficacy for a given health issue or injury circumstance dependant on how long after brewing it is ingested/applied. This is why I am also of the opinion there are more options available with the home produced product over the shop bought product, i.e. high alkaline Ph solution and more base Ph solution. Only my opinions of course, but I'm sticking to them until proven otherwise as I haven't found any information relating to efficacy related to Ph of solution, and in all likelihood I never will <g>. N. Date: Fri, 3 Oct 2014 18:02:16 +0930 From: [email protected] To: [email protected] Subject: CS>New Generator choice of three? From: Top Dog <[email protected]> Date: 30/09/2014 4:18 AM 3. Silver Lungs: Watched the videos and read a few websites that tout the commercial like nature of this machine and it's reliability. I do like the bigger silver rods as it should keep from having to buy a new set for a while. Like the polarity reversal function to keep the rods evenly used. Also not sure if having the water a higher PH does really make a difference although it sounds plausible. This unit is high on my list but it does show that it is 4 weeks on backorder which makes me wonder if there is a supply problem or just that popular. The Silverlungs presentation is nice but .... - It has no manual over-ride so you can't make it stronger than 20ppm. - It seems you are stuck with a fixed jar size, and it has to be a beaker. - The high '10' pH claim is dubious. Basically it makes colloidal silver the same way as any other machine but 'somehow' the pH comes out much higher! It doesnt really add up. See the reports for many ionic silver products at www.silver-colloids.com and you'll see that the pH is always around 5 to 7. (Not that it really matters anyway. A mouthful of CS is hardly going to change your body's alkalinity). - It makes a litre of 10ppm in about 90mins. This is almost too quick. 1 mA at the electrodes is generally considered to be the ideal current to produce the smallest particles. To make CS that fast would require a much higher current.. and consequently produce larger particles. I'd like to see a proper particle size report, not that TEM stuff on their site. (This report explains why TEM images for colloidal silver are extremely misleading...http://www.silver-colloids.com/Pubs/TEM.html) David ____________________________________________________________ -- The Silver List is a moderated forum for discussing Colloidal Silver. Rules and Instructions: http://www.silverlist.org Unsubscribe: <mailto:[email protected]?subject=unsubscribe> Archives: http://www.mail-archive.com/[email protected]/maillist.html Off-Topic discussions: <mailto:[email protected]> List Owner: Mike Devour <mailto:[email protected]>
