Why do you have to triple distill sol! We have very hard water here and I just distill once. The water consistently reads '0' on my meter (cheap from Amazon) when distilled whereas it read over 300 before distilling....Dee
Sent from my iPad > On 20 Feb 2015, at 14:47, sol <[email protected]> wrote: > > I have cleaned my SG-6 brew jar (gallon) and installed brand new electrodes. > I don't remember you mentioning if cleaning with peroxide is ok? Well rinsed > afterward with DW, wiped dry with clean paper towelling. > Electrodes wiped with paper towelling wetted with DW. > > The DW reads 1.7 uS on my PWT. Not 0.3 unfortunately, but the best I have at > the moment. > > I have set the generator to the lowest setting, and plan to check tyndal when > it shuts off. > From there I will decide whether to stop at that point and check uS or raise > the setting a bit and check again and so on to see how the tyndal changes, > and whether I have sparklies at any point. > > I don't expect to get a 10 uS product with no or faint tyndal and no > sparklies but I should get a much better product, right? > > I no longer have a distiller, so 0.3uS distilled water isn't going to be > available, and to be honest, I don't see me ever getting another distiller > and double or triple distilling to get the water down to that level. Just > can't manage it anymore. > > what do you think? > sol > > --- > This email has been checked for viruses by Avast antivirus software. > http://www.avast.com > > > -- > The Silver List is a moderated forum for discussing Colloidal Silver. > Rules and Instructions: http://www.silverlist.org > > Unsubscribe: > <mailto:[email protected]?subject=unsubscribe> > Archives: http://www.mail-archive.com/[email protected]/maillist.html > > Off-Topic discussions: <mailto:[email protected]> > List Owner: Mike Devour <mailto:[email protected]> > >
