Dee wrote:
Why do you have to triple distill sol! We have very hard water here and I just
distill once. The water consistently reads '0' on my meter (cheap from Amazon)
when distilled whereas it read over 300 before distilling....Dee
Dee,
I don't have to double or triple distill since I haven't had a
distiller for years and years now. Might have been air contaminants or
water contaminants. Ode and I used to discuss the issue a lot. But used
to be my DW absolutely had to read 0.3uS on my Hanna PWT meter or I'd
get CS that was not clear. I believe your meter must be a TDS, and I
don't know what your '0' reading equates to on a PWT, but I know the
range is different. Anyhoo, when my distiller was new, one pass did it,
but as the still aged, it took two or more passes to get the DW pure
enough. Funnily enough, I now get clear CS with commercial DW that reads
up to about 3.0 uS. But in the old days, commercial DW here often read
7.0 to even 10.0 on my PWT. Made very bad CS.
sol
---
This email has been checked for viruses by Avast antivirus software.
http://www.avast.com
--
The Silver List is a moderated forum for discussing Colloidal Silver.
Rules and Instructions: http://www.silverlist.org
Unsubscribe:
<mailto:[email protected]?subject=unsubscribe>
Archives:
http://www.mail-archive.com/[email protected]/maillist.html
Off-Topic discussions: <mailto:[email protected]>
List Owner: Mike Devour <mailto:[email protected]>
