Harvey, As a retire EE I find your approach very interesting. After you have made CS with is configuration I would strongly suggest that you have a TEM made of the product.
When I used 380 Volt DC for one hour I made very clear CS, however during the process it went deep yellow and then cleared. The TEM showed very large particles 16 to 85 nm!!! The best CS that I have made to date is with 12 KV using a CO2 gas blanket for the arc. The particles are 1-2 nm and 6-8 nm spherical in shape. The other HVAC CS has distorted crystalline structure. I find it very interesting that only one person on the list inquired about my TEM's. What you are looking for is near neutral pH, almost not T.E. and a controllable PPM in ug/l of silver, that is crystal clear and does not fallout or change color in sunlight. When you put all of these objectives in to view the process does tend to become restrictive. "Ole Bob" -- The silver-list is a moderated forum for discussion of colloidal silver. To join or quit silver-list or silver-digest send an e-mail message to: [email protected] -or- [email protected] with the word subscribe or unsubscribe in the SUBJECT line. To post, address your message to: [email protected] Silver-list archive: http://escribe.com/health/thesilverlist/index.html List maintainer: Mike Devour <[email protected]>
