Doesn't a GFI just have an internal breaker that's set at a usable amp
rating for appliances?  If so, it would be triggered by the buildup of
*heat* which requires precious milliseconds, if not seconds.  If the
wands were in series with the short, I'm afraid *the body* might supply
enough resistance (up to 1 Meg ohm, initially) to delay the breaker
response.  The bottom line, of course, is to stop current flow >5mA
through the wands.  Amid any uncertainty as to freak circuits that might
*possibly* arise, a fuse in-line with a wand would *definitely* eliminate
ANY conceivable shock above its rating.  Cheap, too, BTW.

Pls. correct me if I'm wrong; thanks for your input!

--Russ

On Tue, 21 Nov 2000 11:53:31 -0500 Marshall Dudley <[email protected]>
writes:
> russ e rosser wrote:
> 
> > On Mon, 20 Nov 2000 22:02:51 -0800 (PST) John Kolb 
> <[email protected]>
> > writes:
> > > ...If the supply
> > > is equiped with a 3 wire plug, connecting one side of the
> > > secondary winding to green wire safty ground, and having proper
> > > sized fuses in both sides of the primary winding would provide
> > > a great amount of protection. Using a style of power transformer
> > > where the winding bobbin is divided providing a solid plastic
> > > barrier between the primary and secondary is also good, but
> > > beyond the control of those using wall warts.
> >
> > 10mA borders on dangerous effects, but pathogen destruction 
> requires only
> > "a few microamps".  So far, we've found a fuse as small as 31mA, 
> but a
> > 5mA fuse in-line with a wand lead--or both, for redundancy (in 
> case a
> > fuse were over rating, or a fuse holder had a freak internal
> > short)--would take care of it ideally, right?
> 
> Would a fuse be fast enough.  OK.  Why don't you just buy a GFI 
> outlet and
> use it?  Safe, cheap, and easy to install.
> 
> Masrhall
> 
> 
> --
> The silver-list is a moderated forum for discussion of colloidal 
> silver.
> 
> To join or quit silver-list or silver-digest send an e-mail message 
> to: 
> [email protected]  -or-  
> [email protected]
> with the word subscribe or unsubscribe in the SUBJECT line.
> 
> To post, address your message to: [email protected]
> Silver-list archive: 
> http://escribe.com/health/thesilverlist/index.html
> List maintainer: Mike Devour <[email protected]>
>