Hi Ya'all,

When I developed the stirrer with the RAdio Shack 1 1/2 v dc motor I used a
piece of #14 plastic coated house wire about 3" long. I put a 15 deg bend on the
free end.  I slid the copper out about 1/4" and cut it off. the empty end will
push on to the motor shaft. With a 1 1/2 volt battery it woud stir up a storm. I
had to put 3 ohms in series with one motor lead. That unit will stir a gallon
jar with no problems. Be sure that the stirrer is centered between the
electrodes as it purpose is to move the DW fast enough so that agglomeration
does not set in.

The change in your conductance readings with time is due to agglomeration of
silver ions. The amount of silver in the CS does not change with time unless it
plates out on the bottle. This is  a very condition.

The very very slight T.E. says that you have a mostly ionic silver solution. We
call it colloidal silver due to custom, but it really is a silver solution. But
at this stage of the game it would be impossible to change custom.

"Ole Bob:

P.S. when answering an email please delete all or most of the message that you
are responding to. Thanks