I believe you will find that current doubles every 10 degree C or so as a rule of thumb. So chilling to 32F would drop the current by about 4:1 from room temperature.
Marshall "[email protected]" wrote: > I just started making some new Distilled water, and am > finding that I am still getting the 2-6 ppm whatever > it is WITHOUT using charcol. I am now in the process > of tyring another exp electrocution, to see if I can > get my yellow water back. It might also not be any > contamination from the distiller, but the fact that I > am running at room temp instead of chilled. My first > batch was non-charchol chilled water. My guess is > that the reaction rates are slowly thus making a > better product? Some have suggested boiling the water > then putting the elctrodes in. I did this once and > alos got black water, but was not sure of the purity > of the distilled water so I will have to re-test this > method > > --- Marshall Dudley <[email protected]> wrote: > > "[email protected]" wrote: > > > > > HI I recently tried making my collidal silver with > > my > > > 9V battery set, and ran everything the same except > > > this time I filtered the distilled water with > > charchol > > > instead of just letting it drip into my glass > > > container. When I initally checked the ppm it was > > > around 20 already without even using the > > electrodes, > > > which leaves me to conclude that the charchol was > > > coming into the water as well? > > > > > > Well I ran it till I got an intial TDS reading of > > 2 > > > ppm,hooked up my electrodes, and got brown ugly > > water > > > with black earth like junk coated on the bottom > > and it > > > looks just like the process when one is making a > > > mirror, that type of greyish silver color no > > yellow > > > was produced. Any ideas what is going wrong. > > > > yes, you contaminated the water with the charcoal. > > Think about it. You > > started with distilled water which was probably 1 > > ppm or better, then ran it > > through an aggragate of chared wood, which contains > > lots of impurities, > > salts, minerals and so forth. I am surprised you > > could get it down that low > > after doing that. > > > > Marshall > > > > > I > > > sampled the product and it doesnt set well causing > > > disiness in the head etc, meaning there most be > > some > > > contaimination or by-products. > > > > > > Corbin > > > > > > __________________________________________________ > > > Do you Yahoo!? > > > Yahoo! News - Today's headlines > > > http://news.yahoo.com > > > > > > -- > > > The silver-list is a moderated forum for > > discussion of colloidal silver. > > > > > > Instructions for unsubscribing may be found at: > > http://silverlist.org > > > > > > To post, address your message to: > > [email protected] > > > > > > Silver-list archive: > > http://escribe.com/health/thesilverlist/index.html > > > > > > List maintainer: Mike Devour <[email protected]> > > > > __________________________________________________ > Do you Yahoo!? > Yahoo! News - Today's headlines > http://news.yahoo.com > > -- > The silver-list is a moderated forum for discussion of colloidal silver. > > Instructions for unsubscribing may be found at: http://silverlist.org > > To post, address your message to: [email protected] > > Silver-list archive: http://escribe.com/health/thesilverlist/index.html > > List maintainer: Mike Devour <[email protected]>
