I think most are using HDPE, not PET.  That is because it is
inexpensive, light, and nonbreakable.

Marshall

Sally Khanna wrote:

> I have a question - why do many of you use PET plastic bottles instead
> of glass to keep the CS in? Thanks,Sally
>
> Dave and Gwlynda Irek <[email protected]> wrote:
>
>      Thanks Bo for the reply. Your right I'm trying to make 20
>      PPM - on the highest setting. I check every gallon of
>      distilled water with my meter before I put it in the
>      SilverGen and the average is 0.2 so I'm pretty sure my water
>      is ok. I brought new PET plastic water jugs for the CS which
>      I have used since day one of making CS. I don't rinse them
>      out between filling them with the next batch of CS - so they
>      should not have any ozonation or minerals from tap water. I
>      will try the next batch on the 12 o'clock setting and see
>      what happens.
>      Thanks so much for your help
>      Gwlynda
>      -------------------------------------------------------------
>      From: bbanever [mailto:[email protected]]
>      Sent: Wednesday, October 27, 2004 12:37 AM
>      To: [email protected]
>      Subject: CS>
>
>      Gwlynda - There are two potential reasons for your yellow
>      batches of CS.  Firstly you are probably trying to make a
>      batch in the 15 - 20ppm range.  Try turning the dial down to
>      12 o'clock so you can make a 10ppm solution.  This will
>      always be clear.  Secondly your water may be
>      contaminated.... make sure the container is clean and the
>      water is only pure distilled water with no ozonation or
>      minerals added. Bob
>
>           ----- Original Message -----
>           From: Dave and Gwlynda Irek
>           To: [email protected]
>           Sent: Tuesday, October 26, 2004 8:24 PM
>           Subject: CS>
>
>           I have been making CS with my SilverGen Pro 9 for
>           about 2 months now. All my 5 gallon batches of CS
>           has been clear until the last 2 - 5 gallons
>           batches. The CS is yellow before I even get it out
>           of the SilverGen. I turn the unit off as soon as
>           it is finished and remove the silver and pump. Let
>           the CS settle for a few minutes then pour it into
>           a PET plastic water jug. Can someone tell me why
>           my CS is turning yellow during and right after the
>           unit turn off?
>           Gwlynda
>           ---------------------------------------------------
>           From: Jim Holmes [mailto:[email protected]]
>           Sent: Tuesday, October 26, 2004 10:27 AM
>           To: [email protected]
>           Subject: RE: CS>question...
>
>           Barrett is the quack.
>
>           There is no citation in the medical literature of
>           electro-colloidal silver, made with pure silver
>           and pure water, causing Argyria.
>
>           I have personally tried to have a dialog with that
>           duck, and he is not willing to have one.
>
>           Hulda Clark just successfully sued his ass.
>
>           JOH
>
>           -----Original Message-----
>           From: sid aust [mailto:[email protected]]
>           Sent: Monday, October 25, 2004 8:19 PM
>           To: [email protected]
>           Subject: CS>question...
>
>           I am new to the forum and wondering what the side
>           effects of taking CS.  I just read one of Dr
>           Barrett's article on how it will turn you grey and
>           all kinds of bad stuff..and of course Dr Barrett
>           is against everything good in alternative
>           medicine..you can fine him on the quack forum...
>           thanks
>           Sid
>
> -----------------------------------------------------------------------
> Do you Yahoo!?
> Yahoo! Mail - You care about security. So do we.