Peter, Just to help you & many others understand wall adapter current ratings better:
Your "transformer" is actually a transformer and a rectifier combination that puts out DC power. It only "puts out" the current that the load consumes. Open circuit, your transformer "puts out" zero current. It is capable of putting out up to 0.4 amps, if the load resistance is low enough. Typically in home brew CS applications you will be drawing currents 100 to 1000 times less than your wall adapter is capable of producing. As most wall adapters are unregulated devices, under the light loads of a CS generator, the output voltage will be up to about 1.4 times higher than that stated on the label. Your sentence would be more correct if you said "my transformer is capable of putting out 0.4 amps." --Steve ----- Original Message ----- From: "Peter M. Stellas" <[email protected]> To: <[email protected]> Sent: Thursday, November 23, 2006 11:36 AM Subject: RE: CS>technical question > You are right, my transformer is putting out 0.400 amps not milliamps. > > Peter > > > > > > -- > The Silver List is a moderated forum for discussing Colloidal Silver. > > Instructions for unsubscribing are posted at: http://silverlist.org > > To post, address your message to: [email protected] > > Address Off-Topic messages to: [email protected] > > The Silver List and Off Topic List archives are currently down... > > List maintainer: Mike Devour <[email protected]> > > > > >
