Hi Ode. I pulled this off the AB Patent. ( The electrode device is operated at approximately ten thousand volts alternating current (with each silver electrode having an individual voltage supply) as described in the patent. It has been found that voltages significantly lower than this produce a composition with larger particles not having the optimal properties described herein. Voltages significantly higher tend to produce a solution with significant ionic silver dissolved therein. The present composition comprises in excess of 97% metallic silver with essentially no free ionic silver in solution. )
http://patft.uspto.gov/netacgi/nph-Parser?Sect1=PTO1&Sect2=HITOFF&d=PALL&p=1&u=%2Fnetahtml%2FPTO%2Fsrchnum.htm&r=1&f=G&l=50&s1=7,135,195.PN.&OS=PN/7,135,195&RS=PN/7,135,195 Frank Key Laboratory analysis shows 96.6 ionic. If Frank Keys analysis is correct I believe their claim of their product being 97% metallic silver would invalidate their patent. Ive made CS using ten thousand volts in a setup similar to theirs, Using a CO2 blanket I was able to produce a ionic silver that a ppm meter would read, without using the CO2 blanket their was no ppm rise. It would be interesting to know if they are using a CO2 blanket, they dont mention this in the patent. Sam L. On 2/5/07, Ode Coyote <[email protected]> wrote:
American Biotech is a big bullshitter...one of the best. BUT, they do make very good "EIS" ..it's just not different from good home made. ode
