On Nov 1, 2015 10:53 AM, Cory Smelosky <[email protected]> wrote: > > On Sun, 1 Nov 2015, Mark Pizzolato wrote: > > > On Nov 1, 2015 10:42 AM, "Cory Smelosky" <[email protected]> wrote: > >> Shouldn't the CSR for the second RQ controller be 760334? It's > > autoconfiguring to 760374! > > > > It depends on what else is in the configuration. The first MSCP disk > > controller has a static address, subsequent controllers have floating > > addresses. > > > > Send along your config and I'll check, or you can see what VMS SYSGEN's > > "CONFIG" stuff shows you... > > > > sim> show qba iospace > Address Vector BR # Device > -------------------- -------- -- - ------ > 20000040 - 2000005F* 2C0-2DC 4 4 DZ
These DZ devices have a higher floating rank than the second mscp controller. Add these to the SYSGEN CONFIG.... > 200000FC - 200000FF* 4 1 RQB > 20001468 - 2000146B 4 1 RQ > 20001920 - 2000192F 4 1 XQ > 20001940 - 20001943 4 1 TQ > 20001F40 - 20001F41 1 QBA > > > >>>show dev > UQSSP Disk Controller 0 (772150) > -DUA0 (RD54) > -DUA1 (RD54) > -DUA2 (RD54) > -DUA3 (RX50) > > UQSSP Disk Controller 1 (760374) > -DUB0 (RD54) > -DUB1 (RD54) > -DUB2 (RD54) > -DUB3 (RD54) > > UQSSP Tape Controller 0 (774500) > -MUA0 (TK50) > -MUA1 (TK50) > -MUA2 (TK50) > -MUA3 (TK50) > > Ethernet Adapter 0 (774440) > -XQA0 (08-00-2B-AA-BB-CC) > > >>>configure > Enter device configuration, HELP, or EXIT > Device,Number? rqdx3 > Device,Number? kda50 > Device,Number? tqk50 > Device,Number? delqa > Device,Number? exit > > Address/Vector Assignments > -774440/120 DELQA > -772150/154 RQDX3 > -760334/300 KDA50 > -774500/260 TQK50 I don't know why the boot ROM code SHOW DEV command doesn't list the DZ devices, maybe it is only showing bootable devices. - Mark
_______________________________________________ Simh mailing list [email protected] http://mailman.trailing-edge.com/mailman/listinfo/simh
