On Sun, 1 Nov 2015, Mark Pizzolato wrote:
Doing that changed it to 760354,
You've got 4 DZV11's in the config. Did you actually add all of them to the
SYSGEN CONFIG?
I didn't want a single DZV11 but I was unable to disable them...
which is at least a number everything agrees on.
Actually, the boot ROM's display of SHOW DEV that sees DUB at 0760374. This is
only due to the fact that it is at the expected address. The table which the
simulator auto config logic uses is the same table the boot ROM and VMS uses to
determine the appropriate addresses.
200000FC - 200000FF* 4 1 RQB
20001468 - 2000146B 4 1 RQ
20001920 - 2000192F 4 1 XQ
20001940 - 20001943 4 1 TQ
20001F40 - 20001F41 1 QBA
show dev
UQSSP Disk Controller 0 (772150)
-DUA0 (RD54)
-DUA1 (RD54)
-DUA2 (RD54)
-DUA3 (RX50)
UQSSP Disk Controller 1 (760374)
-DUB0 (RD54)
-DUB1 (RD54)
-DUB2 (RD54)
-DUB3 (RD54)
UQSSP Tape Controller 0 (774500)
-MUA0 (TK50)
-MUA1 (TK50)
-MUA2 (TK50)
-MUA3 (TK50)
Ethernet Adapter 0 (774440)
-XQA0 (08-00-2B-AA-BB-CC)
configure
Enter device configuration, HELP, or EXIT
Device,Number? rqdx3
Device,Number? kda50
Device,Number? tqk50
Device,Number? delqa
Device,Number? exit
Address/Vector Assignments
-774440/120 DELQA
-772150/154 RQDX3
-760334/300 KDA50
-774500/260 TQK50
I don't know why the boot ROM code SHOW DEV command doesn't list the DZ
devices, maybe it is only showing bootable devices.
Hmmm.
- Mark
--
Cory Smelosky
http://gewt.net Personal stuff
http://gimme-sympathy.org Projects
--
Cory Smelosky
http://gewt.net Personal stuff
http://gimme-sympathy.org Projects
_______________________________________________
Simh mailing list
[email protected]
http://mailman.trailing-edge.com/mailman/listinfo/simh
