On Fri, 2009-03-13 at 18:41 -0400, Becker, Jesse wrote: > All, > > I am working on testing the latest CiscoPlus patch for > Sen. I currently have a mix of Polycoms (650, 550, and 430s all > running firmware 3.1.1) and Cisco (7911 running firmware SIP.8-4-4). > All the phones are showing as registered on the server. Cisco phones > can call any device (another Cisco, Polycom, Voicemail, ect). However, > the Polycoms seem to only be able to call voicemail and other > Polycoms. If I call from a Polycom to an extension on a Cisco phone it > goes straight to voicemail. > > > > Does anyone have any ideas on where I should start troubleshooting? > Has anyone else run into an issue where the Polycoms will only call > each other?
To debug this, you'll need to trace the message flow and see what's going wrong. See: http://sipx-wiki.calivia.com/index.php/Display_SIP_message_flow_using_Sipviewer#Getting_SIP_Messages_to_display when you get the trace data, take a look at it using sipviewer and/or post the trace with a description of your configuration (identify components by IP address), what you were doing, and which call in the trace you're talking about (by call-id or frame number in the trace, preferably). _______________________________________________ sipx-dev mailing list [email protected] List Archive: http://list.sipfoundry.org/archive/sipx-dev Unsubscribe: http://list.sipfoundry.org/mailman/listinfo/sipx-dev
