Hi, In order to allow the Mediant1000/2000/3000 gateway to control the MWI and Transfer Supplementary Services on a PRI-QSIG link I'm proposing adding the following parameters to the Mediant INI file generated by sipXconfig. These parameters are supported by the 5.0/5.2/5.4/5.6 versions of the Mediant firmware.
Please note that some of these parameters are already being sent to the Audiocodes FXS gateways (as noted below): EnableMWI (default=0) Already exists for FXS, controls sending of MWI DefaultNumber (default=ServedUser) Default indicates MWI destination will be controlled by NOTIFY contents MwiSourceNumber (default blank) Controls calling number in PRI SETUP VoiceMailInterface (default=3, hidden) Default indicates PRI-QSIG MWI SubscriptionMode (default=1, hidden) Already exists for FXS, but we want no MWI subscription on PRI TrunkTransferMode (default blank) Controls QSIG transfer supplementary service Any comments or suggestions? Thanks... Dave. _______________________________________________ sipx-dev mailing list [email protected] List Archive: http://list.sipfoundry.org/archive/sipx-dev Unsubscribe: http://list.sipfoundry.org/mailman/listinfo/sipx-dev sipXecs IP PBX -- http://www.sipfoundry.org/
