On Thu, Feb 18, 2010 at 3:01 PM, jnolen <[email protected]> wrote:
> There is still one outstanding issue with this configuration: > > All of the functionality for voice mail works from the phone after > changing <config-server-url-secure> on the voice mail server to point to > the config server. > > >From the GUI, however, the MWI light takes an hour to extinguish after > removing voice mails in the GUI. It works as expected when deleting > from the phone. Probably is not getting updated until the phone > registers again. > > The customer is rather adamant about having the VM server on a separate > host -- is there a way to get this configuration to work? > > To review the configuration: VM is deployed on a separate server from > the config server. The mailstore directory on the VM server is mounted > via nfs on the config server. > > I've attached the voicemail.xml files (presently configured) from both > machines. > > Thanks for the help, > > jim > > > > > > Woof!, > > > > Thanks for the help. That solved the problem. > > > > jim > > > > > I may have jumped the gun on this one. > > > > > > voicemail.xml has the correct address on the master server. > > > > > > It is WRONG on the voice mail server. > > > > > > <config-server-url-secure>https://10.139.50.233:8443 > </config-server-url-secure> > > > > > > which is pointing to itself. > > > > > > I assumed (obviously incorrectly) this would be propagated. > > > > > > I will change the value. Are there any other values that need to be > > > checked? > > > > > > Thanks, > > > jim > > > > > > > > > > > > > Woof! > > > > > > > > On Tue, Feb 16, 2010 at 8:56 AM, jnolen <[email protected]> > wrote: > > > > > Scott, > > > > > > > > > > If you are referencing XX-7102 the issue is not user portal access > -- > > > > > the issue is changing the PIN from the polycom. The mailstore is > > > > > mounted via nfs on the management server. The customer has another > site > > > > > with a similar configuration that works properly. > > > > > > > > Verify that /etc/sipxpbx/voicemail.xml has the correct config server > IP addr: > > > > <config-server-url-secure>https://{ip of config > > > > server}:8443</config-server-url-secure> > > > > > > > > --Woof! > > > > > > _______________________________________________ > > > sipx-dev mailing list [email protected] > > > List Archive: http://list.sipfoundry.org/archive/sipx-dev > > > Unsubscribe: http://list.sipfoundry.org/mailman/listinfo/sipx-dev > > > sipXecs IP PBX -- http://www.sipfoundry.org/ > > > > _______________________________________________ > > sipx-dev mailing list [email protected] > > List Archive: http://list.sipfoundry.org/archive/sipx-dev > > Unsubscribe: http://list.sipfoundry.org/mailman/listinfo/sipx-dev > > sipXecs IP PBX -- http://www.sipfoundry.org/ > > _______________________________________________ > sipx-dev mailing list [email protected] > List Archive: http://list.sipfoundry.org/archive/sipx-dev > Unsubscribe: http://list.sipfoundry.org/mailman/listinfo/sipx-dev > sipXecs IP PBX -- http://www.sipfoundry.org/ > http://sipx-wiki.calivia.com/index.php/Detailed_Roadmap_sipXecs_IP_PBX See the section on 4.2 for cluster management.
_______________________________________________ sipx-dev mailing list [email protected] List Archive: http://list.sipfoundry.org/archive/sipx-dev Unsubscribe: http://list.sipfoundry.org/mailman/listinfo/sipx-dev sipXecs IP PBX -- http://www.sipfoundry.org/
