Hi Joegen,
Sure I will raise it but I cannot touch snapshot because we had
a problem.Whether I can attach a pcap or make a call to AA and attach a
freeswitch.log?
Regards,
Kumaran T
Joegen Baclor wrote:
> Hi Kumaran,
>
> I've checked the config and indeed that seems to be the only thing you
> need to set to enable SRTP offers. I guess a jira is a good idea so
> the config team can take a look under the hood.
>
> On 06/13/2011 03:35 PM, Kumaran wrote:
>> Hi Joegen,
>> Any update about the SRTP(whether I need to do something else in
>> setting or Enable the SRTP under phones->security is enough) or need
>> to rise a Jira?
>>
>> Regards,
>> Venkateshwaran T
>>
>> Kumaran wrote:
>>> Hi Joegen,
>>> Whether this is a issue or configuration problem.Some points
>>> are mentioned in the wiki but I cannot understand...Please let me
>>> know whats wrong?
>>>
>>> Regards,
>>> Kumaran T
>>>
>>>
>>> Joegen Baclor wrote:
>>>> Nope. Clearly Polycom is not offering SRTP.
>>>>
>>>>
>>>> v=0
>>>> o=- 1167611423 1167611423 IN IP4 176.25.3.189
>>>> s=Polycom IP Phone
>>>> c=IN IP4 176.25.3.189
>>>> t=0 0
>>>> a=sendrecv
>>>> m=audio 2234 RTP/AVP 9 0 8 18 101
>>>> a=rtpmap:9 G722/8000
>>>> a=rtpmap:0 PCMU/8000
>>>> a=rtpmap:8 PCMA/8000
>>>> a=rtpmap:18 G729/8000
>>>> a=fmtp:18 annexb=no
>>>> a=rtpmap:101 telephone-event/8000
>>>>
>>>>
>>>> On 06/10/2011 09:36 PM, Kumaran wrote:
>>>>> Hi Joegen,
>>>>> Please check the Pcap attachment and let me know the update once
>>>>> when you checked it..
>>>>>
>>>>> Thanks,
>>>>> Venkateshwaran T
>>>>>
>>>>>
>>>>> Kumaran wrote:
>>>>>> Hi Joegen,
>>>>>> I tried but I cannot find it whether normal or secure
>>>>>> connection..Can you please help me out to check it....
>>>>>>
>>>>>> Thanks,
>>>>>> Venkateshwaran T
>>>>>>
>>>>>> Joegen Baclor wrote:
>>>>>>> On 06/10/2011 08:02 PM, Kumaran wrote:
>>>>>>>> Hi All,
>>>>>>>> I'm trying to configure SRTP for polycom 550.I enabled SRTP in
>>>>>>>> Devices->phones->security->AES_CM_128_HMAC_SHA1_80 in SDP and send
>>>>>>>> profiles to both phones.I read in wiki that if SRTP connection is
>>>>>>>> established we can see lock symbol towards line key...But when
>>>>>>>> we make a
>>>>>>>> call between these two phones the lock symbol is not seen and
>>>>>>>> also for
>>>>>>>> IVR..Please let me know whether I'm missing something in
>>>>>>>> configuration...Also the bad luck is we cannot verify in the
>>>>>>>> SDP part
>>>>>>>> in the logs because we have logs replication problem.
>>>>>>>>
>>>>>>>> Regards,
>>>>>>>> Venkateshwaran T
>>>>>>>>
>>>>>>> Try calling the AA. Sofia log of freeswitch should be able to
>>>>>>> give you an idea if SRTP is used.
>>>>>>
>>>>>> _______________________________________________
>>>>>> sipx-dev mailing list
>>>>>> [email protected]
>>>>>> List Archive: http://list.sipfoundry.org/archive/sipx-dev/
>>>>>
>>>
>>>
>>
>>
_______________________________________________
sipx-dev mailing list
[email protected]
List Archive: http://list.sipfoundry.org/archive/sipx-dev/
