Hi Joegen, Thanks for update Joegen.I will do it and assign to you after creating the issue...One more query is "is there any option to enable or disable user authentication on the server(not related SRTP)".Please let me know the update...
Regards, Kumaran T Joegen Baclor wrote: > I guess the best way is to report the jira against a 4.4 test since > that config seems to be an old one, it should affect 4.4 as well. > > On 06/13/2011 07:24 PM, Kumaran wrote: >> Hi Joegen, >> Sure I will raise it but I cannot touch snapshot because we >> had a problem.Whether I can attach a pcap or make a call to AA and >> attach a freeswitch.log? >> >> Regards, >> Kumaran T >> >> >> Joegen Baclor wrote: >>> Hi Kumaran, >>> >>> I've checked the config and indeed that seems to be the only thing >>> you need to set to enable SRTP offers. I guess a jira is a good >>> idea so the config team can take a look under the hood. >>> >>> On 06/13/2011 03:35 PM, Kumaran wrote: >>>> Hi Joegen, >>>> Any update about the SRTP(whether I need to do something else in >>>> setting or Enable the SRTP under phones->security is enough) or >>>> need to rise a Jira? >>>> >>>> Regards, >>>> Venkateshwaran T >>>> >>>> Kumaran wrote: >>>>> Hi Joegen, >>>>> Whether this is a issue or configuration problem.Some points >>>>> are mentioned in the wiki but I cannot understand...Please let me >>>>> know whats wrong? >>>>> >>>>> Regards, >>>>> Kumaran T >>>>> >>>>> >>>>> Joegen Baclor wrote: >>>>>> Nope. Clearly Polycom is not offering SRTP. >>>>>> >>>>>> >>>>>> v=0 >>>>>> o=- 1167611423 1167611423 IN IP4 176.25.3.189 >>>>>> s=Polycom IP Phone >>>>>> c=IN IP4 176.25.3.189 >>>>>> t=0 0 >>>>>> a=sendrecv >>>>>> m=audio 2234 RTP/AVP 9 0 8 18 101 >>>>>> a=rtpmap:9 G722/8000 >>>>>> a=rtpmap:0 PCMU/8000 >>>>>> a=rtpmap:8 PCMA/8000 >>>>>> a=rtpmap:18 G729/8000 >>>>>> a=fmtp:18 annexb=no >>>>>> a=rtpmap:101 telephone-event/8000 >>>>>> >>>>>> >>>>>> On 06/10/2011 09:36 PM, Kumaran wrote: >>>>>>> Hi Joegen, >>>>>>> Please check the Pcap attachment and let me know the update >>>>>>> once when you checked it.. >>>>>>> >>>>>>> Thanks, >>>>>>> Venkateshwaran T >>>>>>> >>>>>>> >>>>>>> Kumaran wrote: >>>>>>>> Hi Joegen, >>>>>>>> I tried but I cannot find it whether normal or secure >>>>>>>> connection..Can you please help me out to check it.... >>>>>>>> >>>>>>>> Thanks, >>>>>>>> Venkateshwaran T >>>>>>>> >>>>>>>> Joegen Baclor wrote: >>>>>>>>> On 06/10/2011 08:02 PM, Kumaran wrote: >>>>>>>>>> Hi All, >>>>>>>>>> I'm trying to configure SRTP for polycom 550.I enabled >>>>>>>>>> SRTP in >>>>>>>>>> Devices->phones->security->AES_CM_128_HMAC_SHA1_80 in SDP and >>>>>>>>>> send >>>>>>>>>> profiles to both phones.I read in wiki that if SRTP >>>>>>>>>> connection is >>>>>>>>>> established we can see lock symbol towards line key...But >>>>>>>>>> when we make a >>>>>>>>>> call between these two phones the lock symbol is not seen and >>>>>>>>>> also for >>>>>>>>>> IVR..Please let me know whether I'm missing something in >>>>>>>>>> configuration...Also the bad luck is we cannot verify in the >>>>>>>>>> SDP part >>>>>>>>>> in the logs because we have logs replication problem. >>>>>>>>>> >>>>>>>>>> Regards, >>>>>>>>>> Venkateshwaran T >>>>>>>>>> >>>>>>>>> Try calling the AA. Sofia log of freeswitch should be able to >>>>>>>>> give you an idea if SRTP is used. >>>>>>>> >>>>>>>> _______________________________________________ >>>>>>>> sipx-dev mailing list >>>>>>>> [email protected] >>>>>>>> List Archive: http://list.sipfoundry.org/archive/sipx-dev/ >>>>>>> >>>>> >>>>> >>>> >>>> >> >> _______________________________________________ sipx-dev mailing list [email protected] List Archive: http://list.sipfoundry.org/archive/sipx-dev/
