I guess the best way is to report the jira against a 4.4 test since that config seems to be an old one, it should affect 4.4 as well.
On 06/13/2011 07:24 PM, Kumaran wrote: > Hi Joegen, > Sure I will raise it but I cannot touch snapshot because we had > a problem.Whether I can attach a pcap or make a call to AA and attach > a freeswitch.log? > > Regards, > Kumaran T > > > Joegen Baclor wrote: >> Hi Kumaran, >> >> I've checked the config and indeed that seems to be the only thing >> you need to set to enable SRTP offers. I guess a jira is a good idea >> so the config team can take a look under the hood. >> >> On 06/13/2011 03:35 PM, Kumaran wrote: >>> Hi Joegen, >>> Any update about the SRTP(whether I need to do something else in >>> setting or Enable the SRTP under phones->security is enough) or need >>> to rise a Jira? >>> >>> Regards, >>> Venkateshwaran T >>> >>> Kumaran wrote: >>>> Hi Joegen, >>>> Whether this is a issue or configuration problem.Some points >>>> are mentioned in the wiki but I cannot understand...Please let me >>>> know whats wrong? >>>> >>>> Regards, >>>> Kumaran T >>>> >>>> >>>> Joegen Baclor wrote: >>>>> Nope. Clearly Polycom is not offering SRTP. >>>>> >>>>> >>>>> v=0 >>>>> o=- 1167611423 1167611423 IN IP4 176.25.3.189 >>>>> s=Polycom IP Phone >>>>> c=IN IP4 176.25.3.189 >>>>> t=0 0 >>>>> a=sendrecv >>>>> m=audio 2234 RTP/AVP 9 0 8 18 101 >>>>> a=rtpmap:9 G722/8000 >>>>> a=rtpmap:0 PCMU/8000 >>>>> a=rtpmap:8 PCMA/8000 >>>>> a=rtpmap:18 G729/8000 >>>>> a=fmtp:18 annexb=no >>>>> a=rtpmap:101 telephone-event/8000 >>>>> >>>>> >>>>> On 06/10/2011 09:36 PM, Kumaran wrote: >>>>>> Hi Joegen, >>>>>> Please check the Pcap attachment and let me know the update >>>>>> once when you checked it.. >>>>>> >>>>>> Thanks, >>>>>> Venkateshwaran T >>>>>> >>>>>> >>>>>> Kumaran wrote: >>>>>>> Hi Joegen, >>>>>>> I tried but I cannot find it whether normal or secure >>>>>>> connection..Can you please help me out to check it.... >>>>>>> >>>>>>> Thanks, >>>>>>> Venkateshwaran T >>>>>>> >>>>>>> Joegen Baclor wrote: >>>>>>>> On 06/10/2011 08:02 PM, Kumaran wrote: >>>>>>>>> Hi All, >>>>>>>>> I'm trying to configure SRTP for polycom 550.I enabled >>>>>>>>> SRTP in >>>>>>>>> Devices->phones->security->AES_CM_128_HMAC_SHA1_80 in SDP and >>>>>>>>> send >>>>>>>>> profiles to both phones.I read in wiki that if SRTP connection is >>>>>>>>> established we can see lock symbol towards line key...But when >>>>>>>>> we make a >>>>>>>>> call between these two phones the lock symbol is not seen and >>>>>>>>> also for >>>>>>>>> IVR..Please let me know whether I'm missing something in >>>>>>>>> configuration...Also the bad luck is we cannot verify in the >>>>>>>>> SDP part >>>>>>>>> in the logs because we have logs replication problem. >>>>>>>>> >>>>>>>>> Regards, >>>>>>>>> Venkateshwaran T >>>>>>>>> >>>>>>>> Try calling the AA. Sofia log of freeswitch should be able to >>>>>>>> give you an idea if SRTP is used. >>>>>>> >>>>>>> _______________________________________________ >>>>>>> sipx-dev mailing list >>>>>>> [email protected] >>>>>>> List Archive: http://list.sipfoundry.org/archive/sipx-dev/ >>>>>> >>>> >>>> >>> >>> > > _______________________________________________ sipx-dev mailing list [email protected] List Archive: http://list.sipfoundry.org/archive/sipx-dev/
