No there is no such option that would disable user authentication. On 06/13/2011 07:42 PM, Kumaran wrote: > Hi Joegen, > Thanks for update Joegen.I will do it and assign to you after creating > the issue...One more query is "is there any option to enable or > disable user authentication on the server(not related SRTP)".Please > let me know the update... > > Regards, > Kumaran T > > > Joegen Baclor wrote: >> I guess the best way is to report the jira against a 4.4 test since >> that config seems to be an old one, it should affect 4.4 as well. >> >> On 06/13/2011 07:24 PM, Kumaran wrote: >>> Hi Joegen, >>> Sure I will raise it but I cannot touch snapshot because we >>> had a problem.Whether I can attach a pcap or make a call to AA and >>> attach a freeswitch.log? >>> >>> Regards, >>> Kumaran T >>> >>> >>> Joegen Baclor wrote: >>>> Hi Kumaran, >>>> >>>> I've checked the config and indeed that seems to be the only thing >>>> you need to set to enable SRTP offers. I guess a jira is a good >>>> idea so the config team can take a look under the hood. >>>> >>>> On 06/13/2011 03:35 PM, Kumaran wrote: >>>>> Hi Joegen, >>>>> Any update about the SRTP(whether I need to do something else >>>>> in setting or Enable the SRTP under phones->security is enough) or >>>>> need to rise a Jira? >>>>> >>>>> Regards, >>>>> Venkateshwaran T >>>>> >>>>> Kumaran wrote: >>>>>> Hi Joegen, >>>>>> Whether this is a issue or configuration problem.Some >>>>>> points are mentioned in the wiki but I cannot understand...Please >>>>>> let me know whats wrong? >>>>>> >>>>>> Regards, >>>>>> Kumaran T >>>>>> >>>>>> >>>>>> Joegen Baclor wrote: >>>>>>> Nope. Clearly Polycom is not offering SRTP. >>>>>>> >>>>>>> >>>>>>> v=0 >>>>>>> o=- 1167611423 1167611423 IN IP4 176.25.3.189 >>>>>>> s=Polycom IP Phone >>>>>>> c=IN IP4 176.25.3.189 >>>>>>> t=0 0 >>>>>>> a=sendrecv >>>>>>> m=audio 2234 RTP/AVP 9 0 8 18 101 >>>>>>> a=rtpmap:9 G722/8000 >>>>>>> a=rtpmap:0 PCMU/8000 >>>>>>> a=rtpmap:8 PCMA/8000 >>>>>>> a=rtpmap:18 G729/8000 >>>>>>> a=fmtp:18 annexb=no >>>>>>> a=rtpmap:101 telephone-event/8000 >>>>>>> >>>>>>> >>>>>>> On 06/10/2011 09:36 PM, Kumaran wrote: >>>>>>>> Hi Joegen, >>>>>>>> Please check the Pcap attachment and let me know the update >>>>>>>> once when you checked it.. >>>>>>>> >>>>>>>> Thanks, >>>>>>>> Venkateshwaran T >>>>>>>> >>>>>>>> >>>>>>>> Kumaran wrote: >>>>>>>>> Hi Joegen, >>>>>>>>> I tried but I cannot find it whether normal or secure >>>>>>>>> connection..Can you please help me out to check it.... >>>>>>>>> >>>>>>>>> Thanks, >>>>>>>>> Venkateshwaran T >>>>>>>>> >>>>>>>>> Joegen Baclor wrote: >>>>>>>>>> On 06/10/2011 08:02 PM, Kumaran wrote: >>>>>>>>>>> Hi All, >>>>>>>>>>> I'm trying to configure SRTP for polycom 550.I enabled >>>>>>>>>>> SRTP in >>>>>>>>>>> Devices->phones->security->AES_CM_128_HMAC_SHA1_80 in SDP >>>>>>>>>>> and send >>>>>>>>>>> profiles to both phones.I read in wiki that if SRTP >>>>>>>>>>> connection is >>>>>>>>>>> established we can see lock symbol towards line key...But >>>>>>>>>>> when we make a >>>>>>>>>>> call between these two phones the lock symbol is not seen >>>>>>>>>>> and also for >>>>>>>>>>> IVR..Please let me know whether I'm missing something in >>>>>>>>>>> configuration...Also the bad luck is we cannot verify in >>>>>>>>>>> the SDP part >>>>>>>>>>> in the logs because we have logs replication problem. >>>>>>>>>>> >>>>>>>>>>> Regards, >>>>>>>>>>> Venkateshwaran T >>>>>>>>>>> >>>>>>>>>> Try calling the AA. Sofia log of freeswitch should be able >>>>>>>>>> to give you an idea if SRTP is used. >>>>>>>>> >>>>>>>>> _______________________________________________ >>>>>>>>> sipx-dev mailing list >>>>>>>>> [email protected] >>>>>>>>> List Archive: http://list.sipfoundry.org/archive/sipx-dev/ >>>>>>>> >>>>>> >>>>>> >>>>> >>>>> >>> >>> > >
_______________________________________________ sipx-dev mailing list [email protected] List Archive: http://list.sipfoundry.org/archive/sipx-dev/
