Hi Joegen,
I tried with removing the MOH uri for one user and enabled the RFC
2543 at this time I can see c=IN IP4 0.0.0.0 in SDP
Regards,
Kumaran T
Joegen Baclor wrote:
>
> I'll have seconds thoughts about this. Probably, the best way we can
> do about this is to correct the SDP in the sipx bridge and hope for
> the best. But we really cannot be sure if a UA sending 0.0.0.0 really
> means it (meaning I have both send and receive closed, don't even try)
> or go ahead and try sending, I'm going to accept it because I lied.
> I really meant a=recvonly and not a=inactive.
>
>
> On 06/22/2011 06:27 PM, Tony Graziano wrote:
>> This makes me think if we have a really funky requirement for support
>> moh (lots of old clunky cisco phones, for example)...
>>
>> phone group>line>registration
>>
>> where we can have a moh uri that essentially uses or allows 0.0.0.0,
>> which would possibly be a way to support phones that are crappy. I'm
>> not sure it is worth it, but I feel like FS can probably mimic it
>> somehow.
>>
>> On Wed, Jun 22, 2011 at 6:15 AM, Tony Graziano
>> <[email protected]> wrote:
>>> the phone has a moh uri, which can be deleted at the line level:
>>>
>>> Phone>Line>registration>
>>>
>>> musicOnHold.uri (Default: ~~mh~@sipdomain)
>>>
>>> On Wed, Jun 22, 2011 at 6:12 AM,
>>> Kumaran<[email protected]> wrote:
>>>> Hi Joegen,
>>>> We can disable in Feature->MOH->None.I'm I right?
>>>>
>>>> Regards,
>>>> Kumaran T
>>>>
>>>> Kumaran wrote:
>>>>> Joegen
>>>>> Can you please tell me how to disable the MOH?
>>>>> Thanks
>>>>>
>>>>> Joegen Baclor wrote:
>>>>>> What I am saying is you need to disable MoH for you to see this.
>>>>>> MoH
>>>>>> and 2543 hold cannot co-exist.
>>>>>>
>>>>>> On 06/22/2011 05:31 PM, Kumaran wrote:
>>>>>>> Hi Joegen,
>>>>>>> I tried on Polycom 550..I enabled for 2 users 200 and
>>>>>>> 123.Thats I
>>>>>>> posted which are Polycom models supported...
>>>>>>> 200 calls 123
>>>>>>> 123 answer the call
>>>>>>> 200 Put on Hold and then Resume the call
>>>>>>>
>>>>>>> Regards,
>>>>>>> Kumaran T
>>>>>>>
>>>>>>> Joegen Baclor wrote:
>>>>>>>> You have configured moh in the polycom. As I've said in another
>>>>>>>> mail, 2543 hold is cont compatible with MoH. My bet is Polycom
>>>>>>>> ignores this flag if MoH is set. Tony?
>>>>>>>>
>>>>>>>> On 06/22/2011 05:17 PM, Kumaran wrote:
>>>>>>>>> Hi Tony,
>>>>>>>>> Please check my SipXproxy.log.By default,it will
>>>>>>>>> unchecked in
>>>>>>>>> Devices->Phones->Sip.So enabled it to check the SDP part whether
>>>>>>>>> its reflecting or not.But I never I find c=0.0.0.0 in SDP part
>>>>>>>>> after putting on HOLD.Its only showing IP address of the phone.
>>>>>>>>>
>>>>>>>>> Regards,
>>>>>>>>> Kumaran T
>>>>>>>>>
>>>>>>>>> Tony Graziano wrote:
>>>>>>>>>> all.
>>>>>>>>>>
>>>>>>>>>> SIP>protocol
>>>>>>>>>>
>>>>>>>>>> useRFC2543hold (Default: unchecked)
>>>>>>>>>>
>>>>>>>>>> If checked, use the obsolete c=0.0.0.0 RFC2543 technique,
>>>>>>>>>> otherwise,
>>>>>>>>>> use SDP media direction attributes (such as a=sendonly) per
>>>>>>>>>> RFC 3264
>>>>>>>>>> when initiating hold. In either case, the phone processes
>>>>>>>>>> incoming
>>>>>>>>>> hold signaling in either format.
>>>>>>>>>>
>>>>>>>>>> However that is simply the interaction of the hold button, and I
>>>>>>>>>> don't
>>>>>>>>>> think it substitutes the MOH uri for services within sipx, etc.
>>>>>>>>>>
>>>>>>>>>> On Wed, Jun 22, 2011 at 4:58 AM, Kumaran
>>>>>>>>>> <[email protected]> wrote:
>>>>>>>>>>
>>>>>>>>>>> Hi All,
>>>>>>>>>>> What are the Polycom models supports RFC 2543 Hold?
>>>>>>>>>>>
>>>>>>>>>>> Regards,
>>>>>>>>>>> Kumaran T
>>>>>>>>>>>
>>>>>>>>>>> _______________________________________________
>>>>>>>>>>> sipx-dev mailing list
>>>>>>>>>>> [email protected]
>>>>>>>>>>> List Archive: http://list.sipfoundry.org/archive/sipx-dev/
>>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>
>>>>>>>>> _______________________________________________
>>>>>>>>> sipx-dev mailing list
>>>>>>>>> [email protected]
>>>>>>>>> List Archive: http://list.sipfoundry.org/archive/sipx-dev/
>>>>>>>
>>>>>
>>>> _______________________________________________
>>>> sipx-dev mailing list
>>>> [email protected]
>>>> List Archive: http://list.sipfoundry.org/archive/sipx-dev/
>>>>
>>>
>>>
>>> --
>>> ======================
>>> Tony Graziano, Manager
>>> Telephone: 434.984.8430
>>> sip: [email protected]
>>> Fax: 434.326.5325
>>>
>>> Email: [email protected]
>>>
>>> LAN/Telephony/Security and Control Systems Helpdesk:
>>> Telephone: 434.984.8426
>>> sip: [email protected]
>>>
>>> Helpdesk Contract Customers:
>>> http://support.myitdepartment.net
>>> Blog:
>>> http://blog.myitdepartment.net
>>>
>>> Linked-In Profile: http://www.linkedin.com/pub/tony-graziano/14/4a6/7a4
>>>
>>
>>
_______________________________________________
sipx-dev mailing list
[email protected]
List Archive: http://list.sipfoundry.org/archive/sipx-dev/
