congratulations :-) On 06/22/2011 07:24 PM, Venkateshwaran T wrote: > Hi Joegen, > I tried with removing the MOH uri for one user and enabled the RFC > 2543 at this time I can see c=IN IP4 0.0.0.0 in SDP > > Regards, > Kumaran T > > > Joegen Baclor wrote: >> >> I'll have seconds thoughts about this. Probably, the best way we can >> do about this is to correct the SDP in the sipx bridge and hope for >> the best. But we really cannot be sure if a UA sending 0.0.0.0 >> really means it (meaning I have both send and receive closed, don't >> even try) or go ahead and try sending, I'm going to accept it because >> I lied. I really meant a=recvonly and not a=inactive. >> >> >> On 06/22/2011 06:27 PM, Tony Graziano wrote: >>> This makes me think if we have a really funky requirement for support >>> moh (lots of old clunky cisco phones, for example)... >>> >>> phone group>line>registration >>> >>> where we can have a moh uri that essentially uses or allows 0.0.0.0, >>> which would possibly be a way to support phones that are crappy. I'm >>> not sure it is worth it, but I feel like FS can probably mimic it >>> somehow. >>> >>> On Wed, Jun 22, 2011 at 6:15 AM, Tony Graziano >>> <[email protected]> wrote: >>>> the phone has a moh uri, which can be deleted at the line level: >>>> >>>> Phone>Line>registration> >>>> >>>> musicOnHold.uri (Default: ~~mh~@sipdomain) >>>> >>>> On Wed, Jun 22, 2011 at 6:12 AM, >>>> Kumaran<[email protected]> wrote: >>>>> Hi Joegen, >>>>> We can disable in Feature->MOH->None.I'm I right? >>>>> >>>>> Regards, >>>>> Kumaran T >>>>> >>>>> Kumaran wrote: >>>>>> Joegen >>>>>> Can you please tell me how to disable the MOH? >>>>>> Thanks >>>>>> >>>>>> Joegen Baclor wrote: >>>>>>> What I am saying is you need to disable MoH for you to see >>>>>>> this. MoH >>>>>>> and 2543 hold cannot co-exist. >>>>>>> >>>>>>> On 06/22/2011 05:31 PM, Kumaran wrote: >>>>>>>> Hi Joegen, >>>>>>>> I tried on Polycom 550..I enabled for 2 users 200 and >>>>>>>> 123.Thats I >>>>>>>> posted which are Polycom models supported... >>>>>>>> 200 calls 123 >>>>>>>> 123 answer the call >>>>>>>> 200 Put on Hold and then Resume the call >>>>>>>> >>>>>>>> Regards, >>>>>>>> Kumaran T >>>>>>>> >>>>>>>> Joegen Baclor wrote: >>>>>>>>> You have configured moh in the polycom. As I've said in another >>>>>>>>> mail, 2543 hold is cont compatible with MoH. My bet is Polycom >>>>>>>>> ignores this flag if MoH is set. Tony? >>>>>>>>> >>>>>>>>> On 06/22/2011 05:17 PM, Kumaran wrote: >>>>>>>>>> Hi Tony, >>>>>>>>>> Please check my SipXproxy.log.By default,it will >>>>>>>>>> unchecked in >>>>>>>>>> Devices->Phones->Sip.So enabled it to check the SDP part whether >>>>>>>>>> its reflecting or not.But I never I find c=0.0.0.0 in SDP part >>>>>>>>>> after putting on HOLD.Its only showing IP address of the phone. >>>>>>>>>> >>>>>>>>>> Regards, >>>>>>>>>> Kumaran T >>>>>>>>>> >>>>>>>>>> Tony Graziano wrote: >>>>>>>>>>> all. >>>>>>>>>>> >>>>>>>>>>> SIP>protocol >>>>>>>>>>> >>>>>>>>>>> useRFC2543hold (Default: unchecked) >>>>>>>>>>> >>>>>>>>>>> If checked, use the obsolete c=0.0.0.0 RFC2543 technique, >>>>>>>>>>> otherwise, >>>>>>>>>>> use SDP media direction attributes (such as a=sendonly) per >>>>>>>>>>> RFC 3264 >>>>>>>>>>> when initiating hold. In either case, the phone processes >>>>>>>>>>> incoming >>>>>>>>>>> hold signaling in either format. >>>>>>>>>>> >>>>>>>>>>> However that is simply the interaction of the hold button, >>>>>>>>>>> and I >>>>>>>>>>> don't >>>>>>>>>>> think it substitutes the MOH uri for services within sipx, etc. >>>>>>>>>>> >>>>>>>>>>> On Wed, Jun 22, 2011 at 4:58 AM, Kumaran >>>>>>>>>>> <[email protected]> wrote: >>>>>>>>>>> >>>>>>>>>>>> Hi All, >>>>>>>>>>>> What are the Polycom models supports RFC 2543 Hold? >>>>>>>>>>>> >>>>>>>>>>>> Regards, >>>>>>>>>>>> Kumaran T >>>>>>>>>>>> >>>>>>>>>>>> _______________________________________________ >>>>>>>>>>>> sipx-dev mailing list >>>>>>>>>>>> [email protected] >>>>>>>>>>>> List Archive: http://list.sipfoundry.org/archive/sipx-dev/ >>>>>>>>>>>> >>>>>>>>>>> >>>>>>>>>>> >>>>>>>>>> >>>>>>>>>> _______________________________________________ >>>>>>>>>> sipx-dev mailing list >>>>>>>>>> [email protected] >>>>>>>>>> List Archive: http://list.sipfoundry.org/archive/sipx-dev/ >>>>>>>> >>>>>> >>>>> _______________________________________________ >>>>> sipx-dev mailing list >>>>> [email protected] >>>>> List Archive: http://list.sipfoundry.org/archive/sipx-dev/ >>>>> >>>> >>>> >>>> -- >>>> ====================== >>>> Tony Graziano, Manager >>>> Telephone: 434.984.8430 >>>> sip: [email protected] >>>> Fax: 434.326.5325 >>>> >>>> Email: [email protected] >>>> >>>> LAN/Telephony/Security and Control Systems Helpdesk: >>>> Telephone: 434.984.8426 >>>> sip: [email protected] >>>> >>>> Helpdesk Contract Customers: >>>> http://support.myitdepartment.net >>>> Blog: >>>> http://blog.myitdepartment.net >>>> >>>> Linked-In Profile: >>>> http://www.linkedin.com/pub/tony-graziano/14/4a6/7a4 >>>> >>> >>> > >
_______________________________________________ sipx-dev mailing list [email protected] List Archive: http://list.sipfoundry.org/archive/sipx-dev/
