so the only difference is you cannot retrieve the parked call and there is no moh played? is this a trunk or pstn gateway? if it is a trunk, whose is it?
On Wed, Oct 19, 2011 at 5:38 AM, Venkateshwaran T < [email protected]> wrote: > ** > > I think its entirely different issue.The > http://track.sipfoundry.org/browse/XX-6791 was about Park server struck > and leaving the MOH session.In my case call is not transferred back to user > who parked the call after parked timeout but only when outside caller call > is parked.But with sipXecs call parked then its working perfectly as > expected. > > Regards, > Kumaran T > > > On 10/19/2011 2:58 PM, Tony Graziano wrote: > > then I think you might be seeing this: > > http://track.sipfoundry.org/browse/XX-6791 > > On Wed, Oct 19, 2011 at 5:25 AM, Venkateshwaran T < > [email protected]> wrote: > >> Hi Tony, >> After 50 secs(Timeout value) if we try to retrieve parked outside >> caller by dialing *4777 won't work.Because there will be no parked >> call.But the call will be active for outside caller(through DID) but no >> audio.. >> FYI: >> We can retrieve the parked call by either dialing *4 or *78 >> >> Regards, >> Kumaran T >> >> >> >> On 10/19/2011 2:32 PM, Tony Graziano wrote: >> >> >> >> On Wed, Oct 19, 2011 at 2:13 AM, Kumaran T < >> [email protected]> wrote: >> >>> Hi All, >>> Please check my scenario for park time-out >>> Precondition: >>> 1. Goto the call park extension 777 and “Enable time-out” = enabled, >>> Park time-out = 50 >>> 2. User 202 has the DID number of the ITSP set as Alias. >>> Steps >>> From a PSTN mobile dial the DID number of the ITSP and The user 202 >>> should start ringing. >>> Answer the call from 202 and blind transfer the call to call park >>> extension 777 >>> Outside caller(PSTN mobile)will hear park MOH >>> After 50 sec the call is not transferring back to 202 user and there >>> will no park MOH played for outside caller(PSTN mobile) and cannot >>> retrieve it manually(*78777) >> >> should be *4777 >> >> *78 is to retrieve ringing calls 9call pickup). *4 is for call park >> retrieve. please try under this first. >> >> >>> from local user.So outside caller should >>> end the call manually.. >>> I cross checked same scenario within local user,its working perfectly >>> call will be transferred and also manually transfer by pressing 0 works >>> in both way for outside and local user >>> Any one faced this issue or can anyone please check the scenario in your >>> setup?Checked in latest 0.0.4.5.2 >>> >>> Regards, >>> Kumaran T >>> >>> >>> >>> > > -- ====================== Tony Graziano, Manager Telephone: 434.984.8430 sip: [email protected] Fax: 434.465.6833 Email: [email protected] LAN/Telephony/Security and Control Systems Helpdesk: Telephone: 434.984.8426 sip: [email protected] Helpdesk Contract Customers: http://support.myitdepartment.net <http://support.myitdepartment.net>Blog: http://blog.myitdepartment.net Linked-In Profile: http://www.linkedin.com/pub/tony-graziano/14/4a6/7a4 Ask about our Internet Fax services!
_______________________________________________ sipx-dev mailing list [email protected] List Archive: http://list.sipfoundry.org/archive/sipx-dev/
