BLF should show BUSY if one of the phones with the line show in use. This is 
how our 650's with 3.10.3 currently work. 

What firmware/bootrom are you using on the 501's?

>>> On 3/24/2009 at 9:08 AM, in message <[email protected]>, 
>>> Keith
Gearty <[email protected]> wrote:
> How is BLF supposed to work under these conditions?  Should it show busy 
> if any phone on the extension is busy, or only if all of them are busy?
> 
> 
> Dale Worley wrote:
> 
> >On Tue, 2009-03-24 at 10:14 +1000, Josh Marshall wrote:
> >  
> >
> >>Note that with sipx 3.10.2 (haven't tested since upgrading to 3.10.3)
> >>the BLF doesn't work if multiple phones are registered to one extension
> >>number. I didn't track it down further, but BLF worked when one was
> >>registered, then stopped updating once a second phone registered. Using
> >>Polycom IP501 phones.
> >>    
> >>
> >
> >It's *supposed* to work with multiple phones on an extension.  Can you
> >get a snapshot showing it failing, and file an issue?
> >
> >Dale
> >
> >
> >_______________________________________________
> >sipx-users mailing list
> >[email protected] 
> >List Archive: http://list.sipfoundry.org/archive/sipx-users 
> >Unsubscribe: http://list.sipfoundry.org/mailman/listinfo/sipx-users 
> >
> >------------------------------------------------------------------------
> >
> >
> >No virus found in this incoming message.
> >Checked by AVG - www.avg.com 
> >Version: 8.5.276 / Virus Database: 270.11.24/2017 - Release Date: 03/22/09 
> 17:51:00
> >
> >  
> >
> _______________________________________________
> sipx-users mailing list
> [email protected] 
> List Archive: http://list.sipfoundry.org/archive/sipx-users 
> Unsubscribe: http://list.sipfoundry.org/mailman/listinfo/sipx-users 
> 

 
 

_______________________________________________
sipx-users mailing list
[email protected]
List Archive: http://list.sipfoundry.org/archive/sipx-users
Unsubscribe: http://list.sipfoundry.org/mailman/listinfo/sipx-users

Reply via email to