>> Thanks Mike. >> > I am using 3.1.2 with Bootrom in one office. The difficulty we have there is > there is on one person from my IT department there at most 3 days per week. > > The volume of calls is pretty good and we are finding our receptionists > Polycom 650 reboots, so we slowly disconnected her sidecars and changed a lot > of BLF's to speedials. > > She has a long standing habit of paging people. To that end we have 40'ish > phones (mosty 330's, the rest 650's) in one paging group. We do see an issue > that she doesn't always hear the chime and the page won't go through. This > site has a VPN connection to 2 other offices and we can inter-office dial > natively via dialplan entries.
Sounds like the same issues, however, these are all on the same campus. As far as I can tell, the small zone paging groups are working fine. Would be interesting to do some packet traces and see what is going on here. I'm assuming the page broadcast is UDP. > > Once her phone starts rebooting, the system degrades to the point where call > parks get lost or un-retrievable. So we've made it a point to set the system > for normal maintenance (shceduled restarts) weekly to avoid this while we > evaluate 4.0 (which i am doing now) and see if that help in the off-chance > the 3.1.2 firmware has a better compatibility with paging/parking in sipxecs > going forward. We also had this happen. Call park BLF goes away completely but you can still park and retrieve blindly. We may have to implement a similar maintenance plan for the short term. Like you, we are looking forward to 4.0 and hoping this fixes some these issues. _______________________________________________ sipx-users mailing list [email protected] List Archive: http://list.sipfoundry.org/archive/sipx-users Unsubscribe: http://list.sipfoundry.org/mailman/listinfo/sipx-users
