In sbc go to sip and enable, push profile and restart services as prompted.
In phone go to sip and remove moh uri and send profiles to phones, rebooting them. ============================ Tony Graziano, Manager Telephone: 434.984.8430 Fax: 434.984.8431 Email: [email protected] LAN/Telephony/Security and Control Systems Helpdesk: Telephone: 434.984.8426 Fax: 434.984.8427 Helpdesk Contract Customers: http://www.myitdepartment.net/gethelp/ ----- Original Message ----- From: [email protected] <[email protected]> To: [email protected] <[email protected]>; [email protected] <[email protected]> Sent: Sun Oct 18 12:52:19 2009 Subject: Re: [sipx-users] sipXbridge & Hunt Groups Once the patch is installed what do I have to do in order to enable ringing/MoH on transfer with sipXbridge? From what I remember enabling MoH on both the phones and the bridge is a BadThing(tm) and can cause problems. Has this option been enabled/fixed, can I enable MoH on the bridge as well as on the phones now? On Thu, Oct 15, 2009 at 5:49 PM, <[email protected]> wrote: > ---------- Forwarded message ---------- > From: "M. Ranganathan" <[email protected]> > To: Tony Graziano <[email protected]> > Date: Thu, 15 Oct 2009 18:43:11 -0400 > Subject: Re: [sipx-users] sipXbridge & Hunt Groups > > > On Thu, Oct 15, 2009 at 6:24 PM, Tony Graziano > <[email protected]> wrote: >> >> >> On Thu, Oct 15, 2009 at 6:05 PM, Tony Graziano >> <[email protected]> wrote: >>> >>> I get disconnected when placing a call and getting to the AA, I do a >>> keypress that sends the call to a hunt group, resulting in immediate >>> disconnect. Am I doing something that is not supported in sipXbridge or >>> is there a special configuration note I have missed? >>> sipXecs 4.02 (ISO) >>> sipXbridge (server behind NAT) >>> ITSP is bandwidth.com >>> inbound/outbound calls work to users, just AA disconnects if I choose a >>> hunt group or user. >>> I have MOH turned on at sipXbridge and off at the phone (Polycom >>> 650/latest GA bootrom/firmware), so I "shouldn't be seeing" a race >>> condition. >>> Have I done everything properly? >>> Tony >> >> I'm not answering myself... really. >> IF I have MOH turned off on sipXbridge AND the phone, I get silence when >> the call is transferred, but it does work, though I cannot hear the ring, >> audio is fine "except" during the silent ring. Ugh. >> Is this a known issue?It does not match XX-4673 or XX-6770 (though I see >> calls through CDR that should have been disconnected even after a couple >> of hours). > > > Yes these are known issues and have been fixed. A patch can be made > available for testing. > > Ranga > > _______________________________________________ sipx-users mailing list [email protected] List Archive: http://list.sipfoundry.org/archive/sipx-users Unsubscribe: http://list.sipfoundry.org/mailman/listinfo/sipx-users sipXecs IP PBX -- http://www.sipfoundry.org/ _______________________________________________ sipx-users mailing list [email protected] List Archive: http://list.sipfoundry.org/archive/sipx-users Unsubscribe: http://list.sipfoundry.org/mailman/listinfo/sipx-users sipXecs IP PBX -- http://www.sipfoundry.org/
