Now you can have both phones and bridge be MOH enabled. I have this working(TM) provided you install the patch.
Regards Ranga. On Sun, Oct 18, 2009 at 1:14 PM, Tony Graziano <[email protected] > wrote: > In sbc go to sip and enable, push profile and restart services as prompted. > > In phone go to sip and remove moh uri and send profiles to phones, > rebooting > them. > ============================ > Tony Graziano, Manager > Telephone: 434.984.8430 > Fax: 434.984.8431 > > Email: [email protected] > > LAN/Telephony/Security and Control Systems Helpdesk: > Telephone: 434.984.8426 > Fax: 434.984.8427 > > Helpdesk Contract Customers: > http://www.myitdepartment.net/gethelp/ > > ----- Original Message ----- > From: [email protected] > <[email protected]> > To: [email protected] <[email protected]>; > [email protected] <[email protected]> > Sent: Sun Oct 18 12:52:19 2009 > Subject: Re: [sipx-users] sipXbridge & Hunt Groups > > Once the patch is installed what do I have to do in order to enable > ringing/MoH on transfer with sipXbridge? From what I remember enabling > MoH on both the phones and the bridge is a BadThing(tm) and can cause > problems. Has this option been enabled/fixed, can I enable MoH on the > bridge as well as on the phones now? > > On Thu, Oct 15, 2009 at 5:49 PM, > <[email protected]> wrote: > > > ---------- Forwarded message ---------- > > From: "M. Ranganathan" <[email protected]> > > To: Tony Graziano <[email protected]> > > Date: Thu, 15 Oct 2009 18:43:11 -0400 > > Subject: Re: [sipx-users] sipXbridge & Hunt Groups > > > > > > On Thu, Oct 15, 2009 at 6:24 PM, Tony Graziano > > <[email protected]> wrote: > >> > >> > >> On Thu, Oct 15, 2009 at 6:05 PM, Tony Graziano > >> <[email protected]> wrote: > >>> > >>> I get disconnected when placing a call and getting to the AA, I do a > >>> keypress that sends the call to a hunt group, resulting in immediate > >>> disconnect. Am I doing something that is not supported in sipXbridge or > >>> is there a special configuration note I have missed? > >>> sipXecs 4.02 (ISO) > >>> sipXbridge (server behind NAT) > >>> ITSP is bandwidth.com > >>> inbound/outbound calls work to users, just AA disconnects if I choose a > >>> hunt group or user. > >>> I have MOH turned on at sipXbridge and off at the phone (Polycom > >>> 650/latest GA bootrom/firmware), so I "shouldn't be seeing" a race > >>> condition. > >>> Have I done everything properly? > >>> Tony > >> > >> I'm not answering myself... really. > >> IF I have MOH turned off on sipXbridge AND the phone, I get silence when > >> the call is transferred, but it does work, though I cannot hear the > ring, > >> audio is fine "except" during the silent ring. Ugh. > >> Is this a known issue?It does not match XX-4673 or XX-6770 (though I see > >> calls through CDR that should have been disconnected even after a couple > >> of hours). > > > > > > Yes these are known issues and have been fixed. A patch can be made > > available for testing. > > > > Ranga > > > > > _______________________________________________ > sipx-users mailing list [email protected] > List Archive: http://list.sipfoundry.org/archive/sipx-users > Unsubscribe: http://list.sipfoundry.org/mailman/listinfo/sipx-users > sipXecs IP PBX -- http://www.sipfoundry.org/ > -- M. Ranganathan
_______________________________________________ sipx-users mailing list [email protected] List Archive: http://list.sipfoundry.org/archive/sipx-users Unsubscribe: http://list.sipfoundry.org/mailman/listinfo/sipx-users sipXecs IP PBX -- http://www.sipfoundry.org/
