Fixed another one. Please use the following: http://track.sipfoundry.org/secure/attachment/22063/patch14.zip
Ranga On Sun, Oct 18, 2009 at 1:42 PM, M. Ranganathan <[email protected]> wrote: > Now you can have both phones and bridge be MOH enabled. I have this > working(TM) provided you install the patch. > > Regards > > Ranga. > > > On Sun, Oct 18, 2009 at 1:14 PM, Tony Graziano < > [email protected]> wrote: > >> In sbc go to sip and enable, push profile and restart services as >> prompted. >> >> In phone go to sip and remove moh uri and send profiles to phones, >> rebooting >> them. >> ============================ >> Tony Graziano, Manager >> Telephone: 434.984.8430 >> Fax: 434.984.8431 >> >> Email: [email protected] >> >> LAN/Telephony/Security and Control Systems Helpdesk: >> Telephone: 434.984.8426 >> Fax: 434.984.8427 >> >> Helpdesk Contract Customers: >> http://www.myitdepartment.net/gethelp/ >> >> ----- Original Message ----- >> From: [email protected] >> <[email protected]> >> To: [email protected] <[email protected]>; >> [email protected] <[email protected]> >> Sent: Sun Oct 18 12:52:19 2009 >> Subject: Re: [sipx-users] sipXbridge & Hunt Groups >> >> Once the patch is installed what do I have to do in order to enable >> ringing/MoH on transfer with sipXbridge? From what I remember enabling >> MoH on both the phones and the bridge is a BadThing(tm) and can cause >> problems. Has this option been enabled/fixed, can I enable MoH on the >> bridge as well as on the phones now? >> >> On Thu, Oct 15, 2009 at 5:49 PM, >> <[email protected]> wrote: >> >> > ---------- Forwarded message ---------- >> > From: "M. Ranganathan" <[email protected]> >> > To: Tony Graziano <[email protected]> >> > Date: Thu, 15 Oct 2009 18:43:11 -0400 >> > Subject: Re: [sipx-users] sipXbridge & Hunt Groups >> > >> > >> > On Thu, Oct 15, 2009 at 6:24 PM, Tony Graziano >> > <[email protected]> wrote: >> >> >> >> >> >> On Thu, Oct 15, 2009 at 6:05 PM, Tony Graziano >> >> <[email protected]> wrote: >> >>> >> >>> I get disconnected when placing a call and getting to the AA, I do a >> >>> keypress that sends the call to a hunt group, resulting in immediate >> >>> disconnect. Am I doing something that is not supported in sipXbridge >> or >> >>> is there a special configuration note I have missed? >> >>> sipXecs 4.02 (ISO) >> >>> sipXbridge (server behind NAT) >> >>> ITSP is bandwidth.com >> >>> inbound/outbound calls work to users, just AA disconnects if I choose >> a >> >>> hunt group or user. >> >>> I have MOH turned on at sipXbridge and off at the phone (Polycom >> >>> 650/latest GA bootrom/firmware), so I "shouldn't be seeing" a race >> >>> condition. >> >>> Have I done everything properly? >> >>> Tony >> >> >> >> I'm not answering myself... really. >> >> IF I have MOH turned off on sipXbridge AND the phone, I get silence >> when >> >> the call is transferred, but it does work, though I cannot hear the >> ring, >> >> audio is fine "except" during the silent ring. Ugh. >> >> Is this a known issue?It does not match XX-4673 or XX-6770 (though I >> see >> >> calls through CDR that should have been disconnected even after a >> couple >> >> of hours). >> > >> > >> > Yes these are known issues and have been fixed. A patch can be made >> > available for testing. >> > >> > Ranga >> > >> > >> _______________________________________________ >> sipx-users mailing list [email protected] >> List Archive: http://list.sipfoundry.org/archive/sipx-users >> Unsubscribe: http://list.sipfoundry.org/mailman/listinfo/sipx-users >> sipXecs IP PBX -- http://www.sipfoundry.org/ >> > > > > -- > M. Ranganathan > > -- M. Ranganathan
_______________________________________________ sipx-users mailing list [email protected] List Archive: http://list.sipfoundry.org/archive/sipx-users Unsubscribe: http://list.sipfoundry.org/mailman/listinfo/sipx-users sipXecs IP PBX -- http://www.sipfoundry.org/
