Haha thanks! In the manual there was no warning about selecting any number of digits..TGIF!
Derek Bartolo Technical Support Comsource Technologies 3585 Laird Drive Unit 13 Mississauga Ontario [email protected] <mailto:[email protected]> 905-608-1400 ext 240 From: Robert Joly [mailto:[email protected]] Sent: Friday, October 30, 2009 11:27 AM To: Derek Bartolo; [email protected] Subject: RE: [sipx-users] Dial Plan Bug? If you specify the number of digits in your FXO dialplan rule, you should be able to lift the ambiguity. ________________________________ From: [email protected] [mailto:[email protected]] On Behalf Of Derek Bartolo Sent: Friday, October 30, 2009 11:22 AM To: [email protected] Subject: [sipx-users] Dial Plan Bug? I think we've stumbled upon a bug. We have a sip trunk and an fxo for gateways. To dial out on the fxo we set a prefix of 9. To dial out on the sip trunk you just dial any number (no prefix). So when we dial a 905-xxx-xxxx number (there's supposed to be no prefix cause of the 10 digits thus the call should be sent via the SIP Trunk) but the number automatically gets passed to the fxo because the first number dialed is a 9. Should there not be a check for example "if number dialed = 10 digits and prefix = null select dial plan with prefix = null"? Sorry fixed also we are running 4.0.3 Derek Bartolo Technical Support Comsource Technologies 3585 Laird Drive Unit 13 Mississauga Ontario [email protected] <mailto:[email protected]> 905-608-1400 ext 240 From: [email protected] [mailto:[email protected]] On Behalf Of Derek Bartolo Sent: Friday, October 30, 2009 11:20 AM To: [email protected] Subject: [sipx-users] Dial Plan Bug? I think we've stumbled upon a bug. We have a sip trunk and an fxo for gateways. To dial out on the fxo we set a prefix of 9. To dial out on the sip trunk you just dial any number (no prefix). So when we dial a 905-xxx-xxxx number (there's supposed to be no prefix cause of the 10 digits thus the call should be sent via the SIP Trunk) but the number automatically gets passed to the fxo because of the 9 prefix. Should there not be a check for example "if number dialed = 10 digits and prefix = null select dial plan with prefix = null"? Derek Bartolo Technical Support Comsource Technologies 3585 Laird Drive Unit 13 Mississauga Ontario [email protected] <mailto:[email protected]> 905-608-1400 ext 240
<<image001.jpg>>
<<image002.jpg>>
<<image003.jpg>>
_______________________________________________ sipx-users mailing list [email protected] List Archive: http://list.sipfoundry.org/archive/sipx-users Unsubscribe: http://list.sipfoundry.org/mailman/listinfo/sipx-users sipXecs IP PBX -- http://www.sipfoundry.org/
