On Fri, 2009-10-30 at 11:19 -0400, Derek Bartolo wrote: > I think we’ve stumbled upon a bug. We have a sip trunk and an fxo for > gateways. To dial out on the fxo we set a prefix of 9. To dial out on > the sip trunk you just dial any number (no prefix). So when we dial a > 905-xxx-xxxx number (there’s supposed to be no prefix cause of the 10 > digits thus the call should be sent via the SIP Trunk) but the number > automatically gets passed to the fxo because of the 9 prefix. Should > there not be a check for example “if number dialed = 10 digits and > prefix = null select dial plan with prefix = null”?
You have not fully described what you set up. If what you did was configure '9 followed by any number of digits', then the number you gave matches that pattern. Also note that dial plan order is significant - first match wins. _______________________________________________ sipx-users mailing list [email protected] List Archive: http://list.sipfoundry.org/archive/sipx-users Unsubscribe: http://list.sipfoundry.org/mailman/listinfo/sipx-users sipXecs IP PBX -- http://www.sipfoundry.org/
