Fortunately I have good redundant UPS's, one a Mitsubishi 15kVa, the other an Eaton 30kVa, both backed up by a Cummins diesel generator. I also have redundant Liebert cooling/filtering units.
I think I've settled on the Audiocodes Mediant 1000 gateway as I am pretty familiar with the mediapack gateways and I know they are "officially" supported by sipX. I've also opted to buy the redundant power supply option. Does anyone have a reseller to recommend for Audiocodes? I know due to their support "arrangements" the reseller has to supply the support. [email protected] wrote: > Subject: > Re: [sipx-users] Cisco vs. Audiocodes vs. Patton ISDN/PRI gateways > From: > "Picher, Michael" <[email protected]> > Date: > Sun, 1 Nov 2009 17:52:51 -0500 > To: > <[email protected]>, "sipx-users" <[email protected]> > > To: > <[email protected]>, "sipx-users" <[email protected]> > > > 'tis true... get a good ups... like a liebert. > > -----Original Message----- > From: [email protected] > [mailto:[email protected]] On Behalf Of > [email protected] > Sent: Sunday, November 01, 2009 12:14 PM > To: sipx-users > Subject: Re: [sipx-users] Cisco vs. Audiocodes vs. Patton ISDN/PRI > gateways > > >> For the user having issues with their >> power supply, couldn't you keep a cold-spare of the power supply on >> > hand > >> or, even better, have dual power supplies? >> > > Some other thoughts on that post. If a piece of hardware keeps blowing > power > supplies, it could be something other than the power supplies as well. > > For sure, make sure that the device is on an adequate UPS. A good > quality UPS > isn't only for power backup but it will keep the power clean and > filtered. You > might have dirty power coming into your location which could be hurting > your > gear. > Another thing is to check the connections between power supply and what > ever > it is connecting to. Make sure that there is no build up or bad > soldering or > anything else which might cause the power supply to pop because it can't > do > what it needs to. > > When power supplies continuously fail, it's not always a given that it's > the > cause, it could simply be the result of something else. > > My 2 cents based on being a hardware guy for a long time :). > > Mike > > > _______________________________________________ > sipx-users mailing list [email protected] > List Archive: http://list.sipfoundry.org/archive/sipx-users > Unsubscribe: http://list.sipfoundry.org/mailman/listinfo/sipx-users > sipXecs IP PBX -- http://www.sipfoundry.org/ > > _______________________________________________ sipx-users mailing list [email protected] List Archive: http://list.sipfoundry.org/archive/sipx-users Unsubscribe: http://list.sipfoundry.org/mailman/listinfo/sipx-users sipXecs IP PBX -- http://www.sipfoundry.org/
