'tis true... get a good ups... like a liebert. -----Original Message----- From: [email protected] [mailto:[email protected]] On Behalf Of [email protected] Sent: Sunday, November 01, 2009 12:14 PM To: sipx-users Subject: Re: [sipx-users] Cisco vs. Audiocodes vs. Patton ISDN/PRI gateways
> For the user having issues with their > power supply, couldn't you keep a cold-spare of the power supply on hand > or, even better, have dual power supplies? Some other thoughts on that post. If a piece of hardware keeps blowing power supplies, it could be something other than the power supplies as well. For sure, make sure that the device is on an adequate UPS. A good quality UPS isn't only for power backup but it will keep the power clean and filtered. You might have dirty power coming into your location which could be hurting your gear. Another thing is to check the connections between power supply and what ever it is connecting to. Make sure that there is no build up or bad soldering or anything else which might cause the power supply to pop because it can't do what it needs to. When power supplies continuously fail, it's not always a given that it's the cause, it could simply be the result of something else. My 2 cents based on being a hardware guy for a long time :). Mike _______________________________________________ sipx-users mailing list [email protected] List Archive: http://list.sipfoundry.org/archive/sipx-users Unsubscribe: http://list.sipfoundry.org/mailman/listinfo/sipx-users sipXecs IP PBX -- http://www.sipfoundry.org/ _______________________________________________ sipx-users mailing list [email protected] List Archive: http://list.sipfoundry.org/archive/sipx-users Unsubscribe: http://list.sipfoundry.org/mailman/listinfo/sipx-users sipXecs IP PBX -- http://www.sipfoundry.org/
