Hi Todd Yes, sipXecs system is working properly, I can call phone to phone on sipXecs, phone to AutoAttendant, Voicemail, and call outside. And if I call Asterisk number from sipXecs, everything works fine, I can hear the dial tone, I can dial extension. Currently we haven't integrate sipXecs with Asterisk, they are separate system and have their own gateway. What I mean about the problem is just call from Asterisk AIX trunk and PSTN line to sipXecs SIP trunk.
prelight? Is it a command used for testing? I didn't run it, I just ran configuration test from sipXecs configuration portal, all successful. Regards Phinux On Mon, Nov 30, 2009 at 1:09 PM, Todd Hodgen <[email protected]> wrote: > > Can you call from phone to phone on the sipXecs? Can you call from Phone > to Auto-Attendant with just sipXecs? I would want to confirm that the > sipXecs system is working properly before I tried to interconnect to another > system of any type. Did you run the pre-flight and what were your results? > > > > You may have done these already but here is where I would start – > > > > Run successful pre-flight. > > Call from a hard or soft phone to AA and voicemail. > > Call from a hard or soft phone to another hard or soft phone. > > > > This is outdated, but may give you some things to work on with your > integration - > http://sipx-wiki.calivia.com/index.php/HowTo_interconnect_sipXecs_IP_PBX_with_the_Asterisk_PBX > > > > *From:* [email protected] [mailto: > [email protected]] *On Behalf Of *Phinux Zhang > *Sent:* Sunday, November 29, 2009 4:51 PM > *To:* [email protected] > *Subject:* [sipx-users] SIP Trunk problem on sipXecs 4.0.4 > > > > Hello All > > We are working on deployment of sipXecs 4.0.4 in our company, but we have > the following two problems related with sip trunk, could you please help me > to take a look and give me some suggestions? Thanks in advance for any > advices. > > 1. We used aster...@home as our production phone system, when I dial from > Asterisk to sipXecs, the AutoAttends(will use AA for short) works fine, but > I can't dial any extension from AA, AA keeps saying the extension is > invalid, but I am sure the extension I dialed is valid, and AA even can't > recognize the number specified on AA configuration page. > > 2. I can dial extension from AA when using PSTN line, but after I dialed > one extension, AA said "Please wait....", after that just silence, I can't > hear dial tone, but the phone I dialed ding ring, it's very strange. > > I hope I can fix this today, or we have to switch to other solution like > Trixbox. I am waiting for you, I really hope you professional guys can help > to figure it out. Thanks in advance, and if you need any information, just > let me know, I'll do what I can. > > Thank you very much. > > Regards > > Phinux >
_______________________________________________ sipx-users mailing list [email protected] List Archive: http://list.sipfoundry.org/archive/sipx-users Unsubscribe: http://list.sipfoundry.org/mailman/listinfo/sipx-users sipXecs IP PBX -- http://www.sipfoundry.org/
