Neither. You have to configure the outbound proxy and port in the settings for the line. Unfortunately with 4.0.x this must be done for every line on every phone.
Devices >> Phones >> <phone_you_wish_to_change> >> Lines >> <line_you_wish_to_change> >> Registration Once you get there change the Outbound Proxy and Outbound Proxy Port settings to point to your audiocodes device on port 5080 If someone has a simpler way of doing this please post it. Josh Patten Assistant Network Administrator Brazos County IT Dept. (979) 361-4676 On 4/6/2010 9:40 AM, Huw Wyn Jones wrote: > We're using Polycom SoundPoint phones (330's and 650's) so the following line > caught my attention. > > >>> Be aware that in sipXecs 4.0 the Polycom SoundPoint IP profiles by default >>> include per-Line Outbound Proxy values, found under "Lines" - X - >>> "Registration" (and "Show Advanced Settings".) The per-Line values take >>> precedence over the per-Phone values found on the "SIP Servers" screen. You >>> need to change the per-Line values.<< >>> > Looking at the Registration section of my own phone in SipX there is a choice > of Primary or Secondary Registration Server in the Registration section. Do I > add the Audiocodes as the Primary or Secondary reg server? Primary I'd > imagine but I thought I'd ask :) > > Cheers > > Huw > > _______________________________________________ sipx-users mailing list [email protected] List Archive: http://list.sipfoundry.org/archive/sipx-users Unsubscribe: http://list.sipfoundry.org/mailman/listinfo/sipx-users sipXecs IP PBX -- http://www.sipfoundry.org/
