Mmmmm. Partial success - partial failure! I set the outbound proxy for my line to the appropriate Audiocodes and after restarting the phone I can see it registered on the Mediant 1000 (<sip:[email protected]>;methods="INVITE, ACK, BYE, CANCEL, OPTIONS, INFO, MESSAGE, SUBSCRIBE, NOTIFY, PRACK, UPDATE, REFER"). Trouble is it's no longer showing as registered on SipX - registration is expired and calls to my line now go straight to voicemail. Any ideas?
H -- Huw Wyn Jones Systems Administrator Coleg Meirion Dwyfor [email protected] ----- Original Message ----- From: "Josh Patten" <[email protected]> To: "Huw Wyn Jones" <[email protected]> Cc: [email protected] Sent: Tuesday, 6 April, 2010 15:53:06 GMT +00:00 GMT Britain, Ireland, Portugal Subject: Re: [sipx-users] Audiocodes M1000/SipX stand alone survivability Neither. You have to configure the outbound proxy and port in the settings for the line. Unfortunately with 4.0.x this must be done for every line on every phone. Devices >> Phones >> <phone_you_wish_to_change> >> Lines >> <line_you_wish_to_change> >> Registration Once you get there change the Outbound Proxy and Outbound Proxy Port settings to point to your audiocodes device on port 5080 If someone has a simpler way of doing this please post it. Josh Patten Assistant Network Administrator Brazos County IT Dept. (979) 361-4676 On 4/6/2010 9:40 AM, Huw Wyn Jones wrote: > We're using Polycom SoundPoint phones (330's and 650's) so the following line > caught my attention. > > >>> Be aware that in sipXecs 4.0 the Polycom SoundPoint IP profiles by default >>> include per-Line Outbound Proxy values, found under "Lines" - X - >>> "Registration" (and "Show Advanced Settings".) The per-Line values take >>> precedence over the per-Phone values found on the "SIP Servers" screen. You >>> need to change the per-Line values.<< >>> > Looking at the Registration section of my own phone in SipX there is a choice > of Primary or Secondary Registration Server in the Registration section. Do I > add the Audiocodes as the Primary or Secondary reg server? Primary I'd > imagine but I thought I'd ask :) > > Cheers > > Huw > > _______________________________________________ sipx-users mailing list [email protected] List Archive: http://list.sipfoundry.org/archive/sipx-users Unsubscribe: http://list.sipfoundry.org/mailman/listinfo/sipx-users sipXecs IP PBX -- http://www.sipfoundry.org/
