did you set the registrar or the outbound proxy? Only change the outbound proxy, make sure to leave the registrar alone. Also make sure the outbound proxy port is set to 5080 on the phone. Could you also post a screenshot of your SAS settings from the mediant web interface?
Josh Patten Assistant Network Administrator Brazos County IT Dept. (979) 361-4676 On 4/6/2010 2:36 PM, Huw Wyn Jones wrote: > Shameless bump :) Any ideas? Looks to me like I'm missing one piece of the > jigsaw to get SAS working > > TIA > > Huw > ----- Original Message ----- > From: "Huw Wyn Jones"<[email protected]> > To: "Josh Patten"<[email protected]> > Cc: [email protected] > Sent: Tuesday, 6 April, 2010 16:15:28 GMT +00:00 GMT Britain, Ireland, > Portugal > Subject: Re: [sipx-users] Audiocodes M1000/SipX stand alone survivability > > Mmmmm. Partial success - partial failure! I set the outbound proxy for my > line to the appropriate Audiocodes and after restarting the phone I can see > it registered on the Mediant 1000 > (<sip:[email protected]>;methods="INVITE, ACK, BYE, CANCEL, OPTIONS, > INFO, MESSAGE, SUBSCRIBE, NOTIFY, PRACK, UPDATE, REFER"). Trouble is it's no > longer showing as registered on SipX - registration is expired and calls to > my line now go straight to voicemail. Any ideas? > > H > > _______________________________________________ sipx-users mailing list [email protected] List Archive: http://list.sipfoundry.org/archive/sipx-users Unsubscribe: http://list.sipfoundry.org/mailman/listinfo/sipx-users sipXecs IP PBX -- http://www.sipfoundry.org/
