> - If you decide you want to manually configure because sipxecs doesn't > cover the way you want to use it you may want to kill yourself with a dull > butter knife (the configuration is not obvious, and the documentation is of
What I found in learning about these things was that the initial learning curve is murder because the documentation seems to be purposely convoluted. The end result always ended up being way simpler than the docs would have had you believe. I had to hire a mediant consultant to take a look at mine to find what I was doing wrong. He spent three hours doing what I had basically already done, but with a few minor changes here and there. That's when I learned about the documentation making practically no sense UNTIL you better understand the machine, then it all comes together. Now I find the machine fantastic, easier to use, very flexible and quite powerful for growth. I don't use the sipx config anymore as I find it much easier to maintain the device on my own. However, I did use the sipx config to initially get the device up and from there manually. > That said Audicodes has a good reputation for not being buggy and the units > I had were well made. I have to say, not one single hiccup since we've had ours. I bought two used M2K units and both are 100% perfect. Can't speak for the 1000 units however. Mike _______________________________________________ sipx-users mailing list [email protected] List Archive: http://list.sipfoundry.org/archive/sipx-users Unsubscribe: http://list.sipfoundry.org/mailman/listinfo/sipx-users sipXecs IP PBX -- http://www.sipfoundry.org/
